28640
20
Zoom out
Zoom in
Previous page
1/148
Next page
20 (GB)
Projecting
To correct trapezoidal distortion
When the projected image is a trapezoid, change the
projector’s position/height by moving the adjusters.
For details on how to use the adjusters,
see “How to use the
adjusters” on page 11 (GB).
If the image is still a trapezoid, correct it in DIGIT
KEYSTONE in the INSTALL SETTING menu.
When the base edge is longer than the upper
edge as shown in the figure below:
When the upper edge is longer than the base
edge as shown in the figure below:
Note
If “ZOOM,” “FULL,” or “NORMAL” have been
selected in ASPECT of the INPUT SETTING menu,
you can change the trapezoid. For details, see the
chart on page 26 (GB).
For details on signal types for which ASPECT can be
changed, see the chart on page 28 (GB).
For details on “DIGIT KEYSTONE,” see page 31 (GB).
Set the value to negative.
Set the value to positive.
4 Press the INPUT key to select the input source.
INPUT-A: Selects the video signal input from the
INPUT A connector, such as component
equipment.
INPUT-B: Selects the video signal input from the
INPUT B connector, such as component
equipment.
VIDEO: Selects the video signal input from the
VIDEO (VIDEO IN) jack.
S-VIDEO: Selects the video signal input from the
S VIDEO (VIDEO IN) jack.
5 Press the PATTERN key on the control panel to
display the test pattern, and turn the focus ring to
adjust the focus.
Press the PATTERN key again to clear the test
pattern.
6 Turn the zoom ring to adjust the size of the
picture.
Note
Looking into the lens when the projector is projecting
an image may cause injury to your eyes.
To cut off the picture
Press the MUTING PIC key on the Remote
Commander. To restore the picture, press the
MUTING PIC key again.
When projected images flicker
On rare occasions, projected images may flicker when
using the projector with CINEMA BLACK in the
INSTALL SETTING menu set to ON.
In this case, set CINEMA BLACK to OFF and clear
the menu display once. Then, display the INSTALL
SETTING menu again and set CINEMA BLACK to
ON.
For details on the INSTALL SETTING menu, see page 31
(GB).
On rare occasions, projected images may flicker until
the projector lamp fully warms up (this takes about 20
minutes after turning on the unit).
As this is not a sign of malfunction, continue to use
the projector normally.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony VPLVW12HT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony VPLVW12HT in the language / languages: Spanish as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony VPLVW12HT

Sony VPLVW12HT User Manual - English - 148 pages

Sony VPLVW12HT User Manual - French - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info