543115
19
Zoom out
Zoom in
Previous page
1/62
Next page
19
The Screen Menu
Adjustments and Settings Using a Menu
The Screen Menu
The Screen menu is used to adjust the size, position and aspect ratio of the projected image for
each input signal.
*1: Available when a computer signal is input from the RGB input connector (INPUT A/INPUT B
(VPL-SX535 only)).
*2: Available when a computer signal is input from the RGB input connector (INPUT A/INPUT B
(VPL-SX535 only)) or a video signal is input from the YP
BPR input connector (INPUT A).
*3: Note that if the projector is used for profit or for public viewing, modifying the original picture
by switching to the aspect mode may constitute an infringement of the rights of authors or
producers, which are legally protected.
Depending on the input signal, setting items for aspect ratio or some other setting items cannot
be set in some cases, or changing the aspect ratio setting may have no effect.
A part of the image may be displayed in black, depending on the setting item.
*4: If the projected image includes large amount of black portion around it, the APA function will
not work properly and a part of the image may not be displayed on the screen and also optimum
image cannot be obtained, depending on the type of input signal. In this case, adjust the “Phase,
“Pitch,” and “Shift” items manually.
*5: VPL-SW535C/SW525C/SW535/SW525 only.
Items Item descriptions
Aspect
*3
Changes the aspect ratio of the projected image (page 20).
When the
computer
signal is
input
Full1: Displays the image to fit the maximum projected image size without
changing the aspect ratio of the input signal.
Full2: Displays the image to fit the maximum projected image size changing
the aspect ratio of the input signal.
Normal: Displays the image on the center position of the projected image
without changing the resolution of the input signal or enlarging the image.
When the
video signal
is input
4:3: Displays the image to fit the maximum projected image size with an
aspect ratio fixed to 4:3.
16:9: Displays the image to fit the maximum projected image size with an
aspect ratio fixed to 16:9.
Full
*5
: Displays the image to fit the maximum projected image size.
Zoom: Zooms the center area of a projected image.
Adjust Signal Adjusts the image of computer signal. Use this item if the edge of the image
is cut and reception is bad.
APA
*1*4
Automatically adjusts the projected image to an optimum quality when you
press the ENTER key (page 6).
Phase
*1
Adjusts the dot phase of the display pixel and the input signal. Set to the
value where looks clearest.
Pitch
*1
The higher the value, the wider the horizontal image elements (pitch). The
lower the value, the narrower the horizontal image elements (pitch).
Shift
*2
H (Horizontal): The higher the value, the farther right the image is projected
on the screen. The lower the value, the image farther left.
V (Vertical): The higher the value, the farther up the image is projected on
the screen. The lower the value, the image farther down.
Notes
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony VPLSW525C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony VPLSW525C in the language / languages: English as an attachment in your email.

The manual is 4,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info