28636
37
Zoom out
Zoom in
Previous page
1/192
Next page
37
GB
The SET SETTING Menu
Adjustments and Settings Using the Menu
Adjust the items “Dot Phase,” “H Size” and
“Shift” in the INPUT SETTING menu when
you adjust the picture manually.
1)The APA (Auto Pixel Alignment)
automatically adjusts “Dot Phase,” “H Size
and “Shift” in the INPUT SETTING menu
for the input signal from a computer.
Auto Input Search
Normally set to “Off.”
When set to “On,” the projector detects input
signals in the following order: Input-A/
Input-B/Input-C/Video/S-Video. It indicates
the input channel when the power is turned
on or the INPUT key is pressed.
Input-A Signal Sel.
Selects the computer, component or video
GBR signal input from the INPUT A
connector.
If the setting is not correct, the color of the
picture becomes strange or “Please check
Input-A Signal Sel.” appears on the screen and
the picture is not displayed.
Input-C Select
Select “Air Shot” orMemory Stick as the
input source that you want to project in the
INPUT C.
Color System
Selects the color system of the input signal.
If you select “Auto,” the projector detects
the color system of the input signal
automatically. If the picture is distorted or
colorless, select the color system according
to the input signal.
When the color system of the input signal is
PAL60, select “PAL.” If “Auto” is selected,
the color system cannot be detected.
Speaker
Set to “Off” to cut off the sound of the
internal speakers. When set to “Off,”
“Speaker: Off” appears on the screen when
you turn on the power.
Stand-by Mode
You can lower the power consumption in
standby mode.
Standard: Normally, select this position
when you use the Air Shot even in
standby mode.
Low: Select this position when you do not
use the Air Shot, and want to lower the
power consumption in standby mode.
Power Saving
When set to “On,” the projector goes into
power saving mode if no signal is input for
10 minutes. Although the lamp goes out, the
cooling fan keeps running. The power
saving mode is canceled when a signal is
input or any key is pressed. In power saving
mode, any key does not function for the first
60 seconds after the lamp goes out.
IR Receiver
Selects the remote control detectors (IR
receiver) on the front and rear of the
projector.
Front&Rear: Activates both the front and
rear detectors.
Front: Activates the front detector only.
Rear: Activates the rear detector only.
Illumination
Selects whether the SONY logo on the top
panel of the projector lights when the
projector is on. Normally, this setting is
“On”. If you want complete darkness or if
the illuminated logo is a distraction, change
this setting to “Off”.
Panel Key Lock
Locks all the control panel keys on the top
and side panels of the projector so that the
projector can be operated only with the
Remote Commander.
To lock the control panel keys, set to “On.”
When it is set to “On,” keeping the I/1 key
on the control panel pressed for 10 seconds
turns the projector on when it is in standby
mode, and turns the projector to standby
mode when the power is on. If you keep
Note
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony VPLCX85 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony VPLCX85 in the language / languages: English as an attachment in your email.

The manual is 4,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony VPLCX85

Sony VPLCX85 User Manual - French - 192 pages

Sony VPLCX85 User Manual - Spanish - 192 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info