543813
21
Zoom out
Zoom in
Previous page
1/50
Next page
21
The SET SETTING Menu
Adjustments and Settings Using a Menu
The SET SETTING Menu
The SET SETTING menu is used for setting various functions of the projector.
Items Item descriptions
Smart APA On/Off: When set to “On,” executes APA automatically when a signal
is input.
*1 *2
Auto Input Search On/Off: When set to “On,” the projector detects input signals in the
following order: Input-A/Input-B/Video/S Video. It indicates the input
channel when the power is turned on or the INPUT key is pressed.
Input-A Signal Sel. Auto/Computer/Component/Video GBR: When set to “Auto,
selects the type of video signal input automatically when “Input-A” is
selected with the INPUT key.
*3
Color System Auto/NTSC3.58/PAL/PAL-60/SECAM/NTSC4.43/PAL-M/PAL-N:
When set to “Auto,” selects the color system automatically when “S
Video” or “Video” is selected with the INPUT key.
*3
Power Saving Mode Lamp Cutoff: The lamp turns off automatically and power
consumption is reduced if no signal is input for 10 minutes. The lamp
lights again when a signal is input or any key is pressed. In Lamp
Cutoff, the ?/1 key lights in orange (page 30).
Standby: The power will be turned off automatically and the projector
goes to Standby mode if no signal is input for 10 minutes.
Off: The Power Saving Mode is canceled.
Panel Key Lock On/Off: When set to “On,” locks all the control panel keys of the
projector. However, you can operate the following when set to “On”:
Press and hold the ?/1 key for approximately 10 seconds during
Standby mode.
c The projector turns on.
Press and hold the ?/1 key for approximately 10 seconds during
power on.
c The projector goes to Standby mode.
Press and hold the MENU key for approximately 10 seconds during
power on.
c “Panel Key Lock” is set to “Off” and enables operation of all keys
on the projector.
CC Display CC1/CC2/CC3/CC4/Text1/Text2/Text3/Text4: Select the closed
caption service (Captions or Text).
Off: Closed caption does not appear.
Network Setting
*4
IP Address Setup Auto (DHCP): The IP address is assigned automatically from the
DHCP server such as a router.
Manual: To specify the IP Address manually.
IP Address/Subnet
Mask/Default
Gateway/DNS
Server/Apply
When “Manual” is selected for “IP Address Setup,” select the item
with the B or b key and input the value with V or v key. When all
items are entered, select “Apply” then press the ENTER key. The
entered settings will be registered.
Lamp Timer Reset When replacing the lamp, resets the lamp timer (page 34).
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony VPL-SX125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony VPL-SX125 in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info