214316
39
Zoom out
Zoom in
Previous page
1/128
Next page
39 (GB)
Troubleshooting
Troubleshooting
If the projector appears to be operating erratically, try to diagnose and correct the problem, using the following
guide. If the problem still persists, consult with qualified Sony personnel.
Image
Symptom
Cause
Remedy
The power is not turned on.
The power has been turned off and on
with the I / 1 key at too short an interval.
Wait for about 90 seconds before turning on the
power
(see page 25 (GB))
.
The lamp cover is detached.
Close the lamp cover securely
(see page 37 (GB))
.
The air filter cover is detached.
Close the air filter cover securely
(see page 38 (GB))
.
Symptom
Cause
Remedy
No picture.
The computer signal is not set to output
to an external monitor.
Set the computer signal to output to an external
monitor
(see page 18 (GB))
.
The computer signal is set to output to
both the LCD of the computer and an
external monitor.
Set the computer signal to output only to an
external monitor
(see page 18 (GB))
.
The picture is noisy.
Noise may appear on the background
depending on the combination of the
numbers of dot input from the connector
and numbers of pixels on the LCD panel.
Change the desktop pattern on the connected
computer.
A cable is disconnected or not connected
properly.
Check that the proper connections have been
made
(see pages 18 (GB) to 23 (GB))
.
The input selection is incorrect. Select the input source correctly using the INPUT
key
(see page 24 (GB))
.
The picture is cut off. Press the PIC MUTING key on the VPL-PX15/
PX10 Remote Commander to release the muting
function
(see page 14 (GB))
.
On-screen display does not
appear.
STATUS in the SET SETTING menu has
been set to OFF.
Set STATUS in the SET SETTING menu to ON
(see page 32 (GB))
.
Power
The picture from INPUT B is
frozen. (VPL-PX15 only)
There is something wrong with the
network software.
Set COLOR SYS in the PICTURE CTRL menu to
match the color system of the input signal
(see
page 29 (GB)).
The color balance of the video
picture is not correct.
The color system of the input signal is
not set correctly.
Set INPUT-B FUNC. in the INSTALL SETTING
menu to OFF, then set it to ON again
(see page
33 (GB)).
Symptom
Cause
Remedy
No Sound.
A cable is disconnected or not connected
properly.
Check that the proper connections have been
made
(see pages 18 (GB) to 23 (GB))
.
Sound
The sound is cut off.
Press the AUDIO MUTING key on the VPL-PX15/
PX10 Remote Commander to release the muting
function
(see page 14 (GB))
.
When inputting sound through
the AUDIO jack, sound comes
through one channel only.
Monaural sound is being input through
the AUDIO jack.
Input stereo sound.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony vpl px15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony vpl px15 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info