752753
32
Zoom out
Zoom in
Previous page
1/148
Next page
GB 32 Menu Lists
Using the Menus
INSTALL SETTING
INFORMATION
This projector has 34 types of preset data for input
signals (the preset memory). When the preset signal is
input, the projector automatically detects the signal
type and recalls the data for the signal from the preset
memory to adjust it to an optimum picture. The
memory number and signal type of that signal are
displayed in the INFORMATION menu.
You can also adjust the preset data through the INPUT
SETTING menu.
This projector also has 20 types of user memories for
Input-A into which you can save the setting of the
adjusted data for an unpreset input signal.
When an unpreset signal is input for the first time, a
memory number is displayed as 0. When you adjust
the data of the signal in the INPUT SETTING menu,
it will be registered to the projector. If more than 20
user memories are registered, the newest memory
always overwrites the oldest one.
See the chart on page 44 to find if the signal is
registered to the preset memory.
Since the data is recalled from the preset memory
about the following signals, you can use these preset
data by adjusting “H size.” Make fine adjustment by
adjusting “Shift.
Note
When the aspect ratio of input signal does not match the screen
size, a part of the screen is displayed in black.
Item Description
V Keystone Corrects the vertical trapezoidal distortion of
the picture. ( )
Auto: Normally set to this postion.
Manual: Sets a lower value (– direction)
when the bottom of the trapezoid is longer
than the top. Sets a higher value (+
direction) when the top of the trapezoid is
longer than the bottom. If you project the
picture using “Side Shot” only, set to
“Manual,” and adjust the level to “0.
Note
The “V Keystone” adjustment may not correct
the trapezoidal distortion perfectly, depending on
the room temperature or the screen angle. In this
case, adjust the distortion manually.
Side Shot Corrects the horizontal trapezoidal distortion
of the picture. ( )
Set the level to “0” when you adjust the
picture using “V Keystone” only.
Note
Even when projecting using “Side Shot,” four
sides of a picture may sometimes not be parallel
to the sides of a screen frame.
Image Flip Flips the picture on the screen horizontally
and/or vertically.
Off: The picture does not flip.
HV: Flips the picture horizontally and
vertically.
H: Flips the picture horizontally.
V: Flips the picture vertically.
Background Selects the background color of the screen
when no signal is input. You can select
Black” or “Blue.”
Test Pattern When set to On, a test pattern is displayed on
the screen when adjusting using “Side Shot”
or “V Keystone.” If you do not want to
display a test pattern, set to Off.
High Altitude
Mode Off: Use this setting when using the
projector at normal altitudes.
On: Use this setting when using the projector
at an altitude of 1,500 m or higher.
Note
When using the projector at high altitudes with
Off setting, the following message may appear.
“Probably use in high altitude. Switch to high
altitude mode on? YesR Nor
If you select “Yes,” “High Altitude Mode”
turns automatically to On.
Item Description
fH Displays the horizontal frequency of the input
signal.
fV Displays the vertical frequency of the input
signal.
Lamp Timer Indicates how long the lamp has been turned
on.
About the Preset Memory
No.
Signal Memory No. H size
Super Mac-2 23 1312
SGI-1 23 1320
Macintosh 19” 25 1328
Input A
fH: 48.47kHz
fV: 60.00Hz
No.23
1024x768
Lamp Timer: 0H
INFORMATION
Memory No.
Signal type
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony VPL-HS3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony VPL-HS3 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 4,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony VPL-HS3

Sony VPL-HS3 User Manual - German, Italian - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info