214550
46
Zoom out
Zoom in
Previous page
1/57
Next page
46 Troubleshooting
Remote Commander
The picture from INPUT C
connector is colored
strange.
Setting for Input-C Signal Sel. in the SET SETTING menu is
incorrect.
c Select Computer, Video GBR or Component for Input-C Signal
Sel. in the SET SETTING menu according to the input signal
(see page 34).
“Please check INPUT-C
setting.” appears in spite of
inputting the correct signal
from INPUT C.
Setting for Input-C Signal Sel. in the SET SETTING menu is
incorrect.
c Select Computer, Video GBR or Component for Input-C Signal
Sel. in the SET SETTING menu according to the input signal
(see page 34).
On-screen display does not
appear.
Status in the MENU SETTING menu has been set to Off.
c Set Status in the MENU SETTING menu to On (see page 35).
Color balance is incorrect. Picture has not been adjusted properly.
c Adjust the picture (see page 31).
Projector is set to wrong color system.
c Set Color System in the SET SETTING menu to match the color
system being input (see page 34).
The picture is too dark. Contrast or Brightness has not been adjusted properly.
c Adjust the Contrast or Brightness in the PICTURE SETTING
menu properly (see page 31).
The lamp has burnt or dims.
c Replace the lamp with a new one (see page 42).
The picture is not clear. Picture is out of focus.
c Adjust the focus (see page 24).
Condensation has occurred on the lens.
c Leave the projector for about two hours with the power on.
The image extends beyond
the screen.
The APA key is pressed although there are black edges around the
image.
c Display the full image on the screen and press the APA key.
c Adjust Shift in the INPUT SETTING menu properly (see
page 33 ).
The picture flickers. Dot Phase in the INPUT SETTING menu has not been adjusted
properly.
c Adjust Dot Phase in the INPUT SETTING menu properly
(page 33).
Symptom Cause and Remedy
The Remote Commander
does not work.
The Remote Commander batteries are dead.
c Replace with a new battery (see page 16).
The menu display does not
appear even when you
press the MENU key on the
Remote Commander.
The PJ/NETWORK select switch on the Remote Commander is
set to NETWORK.
c Set the PJ/NETWORK select switch to PJ, then press the
MENU key.
Symptom Cause and Remedy
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony vpl fx52l at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony vpl fx52l in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info