499633
32
Zoom out
Zoom in
Previous page
1/108
Next page
32 (GB)
Troubleshooting
Troubleshooting
If the projector appears to be operating erratically, try to diagnose and correct the problem, using the following
guide. If the problem still persists, consult with qualified Sony personnel.
Image
Symptom
Cause
Remedy
The power is not turned on.
The power has been turned off and on
with the I / 1 key at a short interval.
Wait for about 120 seconds before turning on the
power
(see page 20 (GB))
.
The lamp cover is detached.
Close the lamp cover securely
(see page 30 (GB))
.
The air filter is not inserted securely. Insert the air filter securely
(see page 31 (GB)).
Symptom
Cause
Remedy
No picture.
The computer signal is not set to output
to external monitor.
Set the computer signal to output to external
monitor
(see page 15 (GB))
.
The computer signal is set to output to
both the LCD of the computer and
external monitor.
Set the computer signal to output only to external
monitor
(see page 15 (GB))
.
The picture is noisy.
Noise may appear on the background
depending on the combination of the
numbers of dot input from the connector
and numbers of pixel on the LCD panel.
Change the desktop pattern on the connected
computer.
Cable is disconnected or not connected
properly.
Check that the proper connections have been
made
(see pages 15 (GB) to 17 (GB))
.
Input selection is incorrect. Select the input source correctly using the INPUT
key
(see page 18 (GB))
.
The picture is cut off. Press the PIC MUTING key to release the muting
function
(see page 19 (GB))
.
On-screen display does not
appear.
STATUS in the SET SETTING menu has
been set to OFF.
Set STATUS in the SET SETTING menu to ON
(see page 26 (GB))
.
Power
The picture from INPUT B
connector is not projected.
Setting for INPUT-B TERM. in the SET
SETTING menu is incorrect.
Set INPUT-B TERM. in the SET SETTING menu
correctly according to the input signal
(see page
26 (GB)).
The picture from INPUT C is
frozen.
There is something wrong with the
network.
Set COLOR SYS in the PICTURE CTRL menu to
match the color system of the input signal
(see
page 23 (GB)).
Color balance of the video
picture is not correct.
The color system of the input signal is
not set correctly.
Set INPUT C FUNC. in the INSTALL SETTING
menu to OFF, then set it to ON again
(see page 27
(GB)).
The digital picture from INPUT
B connector is not projected.
The connecting procedures are wrong. Make connections using the proper procedures
(see page 15 (GB))
.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony VPL-FX50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony VPL-FX50 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony VPL-FX50

Sony VPL-FX50 User Manual - German, Italian - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info