543657
46
Zoom out
Zoom in
Previous page
1/68
Next page
46
Replacing the Lamp (s)
B Maintenance
Replacing the
Lamp (s)
The lamps used as a light source are a
consumable product. Thus replace the
exhausted lamp (Lamp 1 or 2) with a new
one in the following cases.
When the lamp has burnt out or dims
When the message for replacement of the
lamp appears.
The LAMP/COVER indicator flashes.
(Repetition rate of 3 flashes)
The lamp life varies depending on
conditions of use.
Use an LMP-F271 Projector Lamp as the
replacement lamp.
Use of any other lamps than the LMP-F271
may cause damage to the projector.
The lamp remains hot after the projector is
turned off with the ?/1 key. If you touch the
lamp, you may burn your finger. When you
replace the lamp, wait for at least an hour
for the lamp to cool.
If the lamp breaks, consult with qualified
Sony personnel.
Pull out the lamp by holding the knob. If you
touch the lamp, you may be burned or
injured.
When removing the lamp, make sure it
remains horizontal, then pull straight out. Do
not tilt the lamp. If you pull out the lamp
while it is tilted and if the lamp breaks, the
pieces may scatter, causing injury.
1 Turn off the projector, and disconnect
the AC power cord from the AC outlet.
When replacing the lamp after using the
projector, wait for at least an hour for the
lamp to cool.
2 Open the lamp cover by loosening the
four screws with a Phillips
screwdriver.
3 Put your fingers in the slit under the
side panel of the projector, pull it, and
then tip the lamp cover up.
Tip it up until it clicks to fix the cover.
4 Release the three silver plus screws 1
of lamp 1 or lamp 2 with a Phillips
screwdriver, hold the drawing knob 2
between the fingers, and then draw out
the lamp.
Caution
Notes
Note
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony VPL-FW300L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony VPL-FW300L in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info