537518
45
Zoom out
Zoom in
Previous page
1/80
Next page
45
Troubleshooting
Others
Troubleshooting
Before asking to have the projector repaired, try to diagnose the problem, following the
instructions below.
Symptoms Remedy Page
The power is not turned
on.
Check if the AC power cord is firmly connected.
When the “Control Key Lock” is set to “On,” you cannot turn
on the projector using the ?/1 key on the projector.
26
If the lamp or lamp cover is not attached securely, the projector
cannot be turned on.
47
No image. Check if the connecting cable is connected to external
equipment firmly.
9
Check the computer signal is set for output to an external
monitor only. If you set your computer to output to both the
computer’s display and an external monitor, the external
monitor image may not be displayed properly. Set your
computer to output to only an external monitor.
14
Check if the application “USB Display” or “Projector Station
for Network Presentation” is running.
35, 38
Check if the USB memory device connected to the projector is
compatible with the projector.
39
Check if the input source is correctly selected. 14
Check if the picture is muted by pressing the BLANK key. 7
The application “USB
Display” or “Projector
Station for Network
Presentation” does not
start.
Check if the computer connected to the projector meets the
system requirement for the applications.
35, 38
The computer cannot
connect to the projector.
Check “LAN Settings” of the projector.
Check the condition of the wireless connection.
27
On-screen display does
not appear.
The on-screen display does not appear when “Status” in the
Operation menu is set to “Off.
26
The aspect ratio of the
display is not right/the
image is displayed
smaller /a portion of
image does not appear.
The image may not display correctly because the input signal
cannot be judged correctly. In this case, set “Aspect” manually.
6, 21,
23
The image is a
trapezoid.
The images become trapezoidal because of the projection
angle. In this case, you can correct the trapezoidal distortion,
using a Keystone feature.
6, 17,
29
When the “V Keystone” is set to “Manual,” the keystone
feature does not work automatically. Set “V Keystone” to
Auto” or “Manual” to set manually.
6, 17,
29
When the projector is installed on an uneven surface, the
feature may not work properly. In this case, select “Manual” to
set “V Keystone” manually.
6, 17,
29
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony VPL-EW276 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony VPL-EW276 in the language / languages: English as an attachment in your email.

The manual is 3,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info