215117
46
Zoom out
Zoom in
Previous page
1/62
Next page
46
Troubleshooting
Sound
On-screen display does not
appear.
“Status” on the MENU SETTING menu has been set to “Off.
c Set “Status” on the MENU SETTING menu to “On” (see
page 37).
Color balance is incorrect. The picture has not been adjusted properly.
c Adjust the picture (see page 31).
The projector is set to the wrong color system.
c Set “Color System” on the SET SETTING menu to match the
color system being input (see page 35).
The picture is too dark. Contrast or brightness has not been adjusted properly.
c Adjust the contrast or brightness on the “Adjust Picture...menu
properly (see page 31).
The lamp has burnt out or is dim.
c Replace the lamp with a new one (see page 42).
The picture is not clear. The picture is out of focus.
c Adjust the focus (see page 23).
Condensation has accumulated on the lens.
c Leave the projector for about two hours with the power on.
The image extends beyond
the screen.
The APA key has been pressed even though there are black edges
around the image.
c Display the full image on the screen and press the APA key.
c Adjust “Shift” on the INPUT SETTING menu properly (see
page 33).
This input signal cannot be projected as the frequency is out of the
acceptable range of the projector.
c Input a signal that is within the range of the frequency.
The resolution setting of the output signal of the computer is too
high.
c Set the output setting to SVGA (VPL-ES5), XGA (VPL-EX50/
EX5) or WXGA (VPL-EW5) (see page 19).
The picture flickers. Dot Phase” on the INPUT SETTING menu has not been adjusted
properly.
c Adjust “Dot Phase” on the INPUT SETTING menu properly (see
page 33).
Symptom Cause and Remedy
No sound. • A cable is disconnected or the connections are wrong.
c Check that the proper connections have been made (see
page 19).
The audio connecting cable used is incorrect.
c Use a no-resistance stereo audio cable (see page 19).
The sound is not adjusted properly.
c Adjust the sound with the VOLUME +/– key on the Remote
Commander or adjust “Volume” on the PICTURE SETTING
menu (see page 32).
Symptom Cause and Remedy
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony vpl es5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony vpl es5 in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info