475875
20
Zoom out
Zoom in
Previous page
1/88
Next page
GB
8
Replacing the Lamp
Notes
Use LMP-E180 (VPL-CS7) / LMP-E150
(VPL-ES2) Projector Lamp as the replacement
lamp. Use of any other lamps than the LMP-
E180 or the LMP-E150 may cause damage of
the projector.
Be sure to turn off the projector, and
disconnect the AC power cord from the AC
outlet before replacing the lamp.
Caution
The lamp becomes a high temperature after
turning off the projector with the I/1 key. If you
touch the lamp, you may scald your finger.
When you replace the lamp, wait for at least
an hour for the lamp to cool.
Notes
If the lamp breaks, consult with customer
service center.
Pull out the lamp by holding the handle. If you
touch the lamp, you may be burned or injured.
When removing the lamp, make sure it
remains horizontal, then pull straight up. Do
not tilt the lamp. If you pull out the lamp while
tilted and if the lamp breaks, the pieces may
scatter, causing injury.
1 Turn off the projector, and disconnect
the AC power cord from the AC outlet.
2 Place a protective sheet (cloth) beneath
the projector. Turn the projector over so
you can see its underside.
Note
Be sure that the projector is stable after
turning it over.
3 Open the lamp cover by loosening a
screw with the Phillips screwdriver.
Note
For safety sake, do not loosen any other
screws.
4 Loosen the two screws on the lamp unit
with the Phillips screwdriver (1). Fold
out the handle (2), pull out the lamp
unit by the handle (3).
5 Insert the new lamp all the way in until
it is securely in place. Tighten the two
screws. Fold the handle.
Notes
Be careful not to touch the glass surface of
the lamp.
The power will not turn on if the lamp is
not secured properly.
Replacing the Lamp
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony VPL-ES2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony VPL-ES2 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info