214307
43
Zoom out
Zoom in
Previous page
1/156
Next page
43
GB
Troubleshooting
Maintenance
Sound
The picture from INPUT A
connector is colored
strange.
Setting of “Input-A Signal Sel.” in the SET SETTING menu is
incorrect.
c Select “Computer,” “Video GBR” or “Component” correctly
according to the input signal (see page 36).
“Please check Input-A
Signal Sel.” appears in
spite of inputting the
correct signal from INPUT
A.
Setting of “Input-A Signal Sel.” in the SET SETTING menu is
incorrect.
c Select “Computer,” “Video GBR” or “Component” correctly
according to the input signal (see page 36).
On-screen display does not
appear.
“Status” in the MENU SETTING menu has been set to “Off.
c Set “Status” in the MENU SETTING menu to “On” (see page
36).
Color balance is incorrect. Picture has not been adjusted properly.
c Adjust the picture (see page 32).
Projector is set to wrong color system.
c Set “Color System” in the SET SETTING menu to match the
color system being input (see page 36).
The picture is too dark. Contrast or brightness has not been adjusted properly.
c Adjust the contrast or brightness in the “Adjust Picture... menu
properly (see page 32).
The lamp has burnt or dims.
c Replace the lamp with a new one (see page 39).
The picture is not clear. Picture is out of focus.
c Adjust the focus (see page 24).
Condensation has occurred on the lens.
c Leave the projector for about two hours with the power on .
The image extends beyond
the screen.
The APA key is pressed although there are black edges around the
image.
c Display the full image on the screen and press the APA key.
c Adjust “Shift” in the INPUT SETTING menu properly (see
page 34).
The picture flickers. “Dot Phase” in the INPUT SETTING menu has not been adjusted
properly.
c Adjust “Dot Phase” in the INPUT SETTING menu properly
(see page 34).
Symptom Cause and Remedy
No sound. Cable is disconnected or the connections are wrong.
c Check that the proper connections have been made (see page
17).
The audio connecting cable is incorrect.
c Use a no-resistance stereo audio cable (see page 18).
The sound is not adjusted properly.
c Adjust the sound (see page 25).
Symptom Cause and Remedy
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony vpl es1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony vpl es1 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 3,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info