543120
27
Zoom out
Zoom in
Previous page
1/54
Next page
27
The INSTALL SETTING Menu
Adjustments and Settings Using a Menu
The INSTALL SETTING Menu
The INSTALL SETTING menu is used for installing the projector.
Items Item descriptions
Screen Fitting HV Keystone/ Warping: You can choose how to correct image twist.
V Keystone
*1*5
This is displayed when “HV Keystone” is selected in the “Screen Fitting.
Auto: The Keystone adjustment is done automatically. If the screen is
tilted, this function may not work properly. In that case, select “Manual”
for Keystone adjustment.
Manual: The higher the setting, the narrower the top of the projected
image. The lower the setting, the narrower the bottom.
H Keystone
*1*5
This is displayed when “HV Keystone” is selected in the “Screen Fitting.
The higher the setting, the narrower the right part of the projected image.
The lower the setting, the narrower the left part.
Warping This is displayed when “Warping” is selected in the “Screen Fitting”.
Adjust: You can correct image twist.
Reset: You can reset adjusted values back to the default values.
Image Flip HV/H/V/Off: Flips the projected image horizontally and/or vertically
according to the installation method.
Background Black/Blue: Selects the background color of the projected image when no
signal is input.
Lamp Mode High/Standard/Low: When set to “High,” the image becomes brighter,
and power consumption becomes higher.
High Altitude
Mode
*2
On/Off: Set to “On” when using the projector at an altitude of 1,500 m or
higher. Continuing to use the wrong setting may affect component
reliability.
Security Lock
*3
On/Off: This function enables restriction of the projector to authorized
users by password. The setting procedures for security locking are as
follows:
1 Select “On” and press ENTER to display the setting menu.
2 Input the password with the MENU, V/v/B/b, and ENTER keys. (The
default password setting is “ENTER, ENTER, ENTER, ENTER.”)
3 Input a new password with the MENU, V/v/B/b, and ENTER keys.
4 Enter the password again to confirm.
Enter the password when you turn on the projector after disconnecting and
reconnecting the AC power cord.
When it is set to “Off,” you can cancel the security lock. You are required to
input the password again.
If you fail to enter the correct password after three consecutive times, the
projector cannot be used. In this case, press the ?/1 key to go Standby
mode then turn on the power again.
Direct Power On On/Off: When set to “On,” you can turn the power on without going to
Standby mode when the AC power cord is connected to a wall outlet.
Regardless of the Direct Power On setting, you can disconnect the AC
power cord to turn off the power without going to the Standby mode.
External Control REMOTE: Select to control the projector using RS-232C.
NETWORK: Select to control the projector via network.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony VPL-CX235 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony VPL-CX235 in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info