543120
24
Zoom out
Zoom in
Previous page
1/54
Next page
24
The SET SETTING Menu
The SET SETTING Menu
The SET SETTING menu is used for setting various functions of the projector.
Items Item descriptions
AUTO POWER
SAVING
You can make various power reduction settings.
With No Input Lamp Cutoff: The lamp turns off automatically and power
consumption is reduced if no signal is input for 10 minutes. The lamp
lights again when a signal is input or any key is pressed. In Lamp
Cutoff, the ON/STANDBY indicator lights in orange. (page 33)
Standby: If no signal is input to the unit for more than 10 minutes, the
power turns off automatically, and the unit enters standby mode.
Off: You can deactivate the With No Input.
With Static Signal Lamp Dimming/Off: If “Lamp Dimming” is selected, the lamp
slowly dims when the image has not changed for a period of time. You
can choose the period before the image darkens from “5,” “10, “15,
“20” minutes or “Demo..” If you select “Demo.,” the image will
darken about 30 seconds later.
Smart APA On/Off: When set to “On, executes APA automatically when a signal
is input.
*1*2
Auto Input Search On/Off: When set to “On,the projector detects input signals in the
following order: Input-A/Input-B/Input-C/Video/S Video. It indicates
the input channel when the power is turned on or the INPUT key is
pressed.
Input-A Signal Sel. Auto/Computer/Component/Video GBR: When set to “Auto,
selects the type of video signal input automatically when “Input-A” is
selected with the INPUT key.
*3
Color System Auto/NTSC3.58/PAL/PAL-60/SECAM/NTSC4.43/PAL-M/PAL-N:
When set to “Auto,” selects the color system automatically when “S
Video” or “Video” is selected with the INPUT key.
*3
IR Receiver The front and rear remote control detectors of the projector.
Front & Rear: The IR receivers on the front and rear of the unit are
available.
Front: The IR receiver on the front is available.
Rear: The IR receiver on the rear is available.
Panel Key Lock On/Off: When set to “On,” locks all the control panel keys of the
projector. However, you can operate the following when set to “On”:
Press and hold the ?/1 key for approximately 10 seconds during
Standby mode.
c The projector turns on.
Press and hold the ?/1 key for approximately 10 seconds during
power on.
c The projector goes to Standby mode.
Press and hold the MENU key for approximately 10 seconds during
power on.
c “Panel Key Lock” is set to “Off” and enables operation of all keys
on the projector.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony VPL-CX235 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony VPL-CX235 in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info