214580
35
Zoom out
Zoom in
Previous page
1/45
Next page
35
Troubleshooting
Others
The picture is noisy. Noise may appear on the background depending on the combination
of the number of dots input from the connector and the numbers of
pixels on the LCD panel.
c Change the desktop pattern on the connected computer.
The picture from the
INPUT A connector is
colored strangely.
The setting of “Input-A Signal Sel.” on the Setup menu is incorrect.
c Select “Auto”, “Computer,” “Video GBR” or “Component”
correctly according to the input signal (see page 28).
“Please check Input-A
Signal Sel.” appears in
spite of inputting the
correct signal from
INPUT A.
The setting of “Input-A Signal Sel.” on the Setup menu is incorrect.
c Select “Auto”, “Computer,” “Video GBR” or “Component”
correctly according to the input signal (see page 28).
On-screen display does not
appear.
“Status” on the Setup menu has been set to “Off.
c Set “Status” on the Setup menu to “On” (see page 28).
Color balance is incorrect. The picture has not been adjusted properly.
c Adjust the picture (see page 21).
The projector is set to the wrong color system.
c Set “Color System” on the Setup menu to match the color
system being input (see page 28).
The picture is too dark. Contrast or brightness has not been adjusted properly.
c Adjust the contrast or brightness on the “Adjust Picture...” menu
of the Picturem menu properly (see page 21).
The lamp has burnt out or is dim.
c Replace the lamp with a new one (see page 31).
The picture is not clear. The picture is out of focus.
c Adjust the focus (see page 13).
Condensation has accumulated on the lens.
c Leave the projector for about two hours with the power on.
The image extends beyond
the screen.
The APA key has been pressed even though there are black edges
around the image.
c Display the full image on the screen and press the APA key.
c Adjust “Shift” on the Adjust Signal... menu of the Signal menu
properly (see page 22).
The picture flickers. “Dot Phase” on the Adjust Signal... menu of the Signal menu has not
been adjusted properly.
c Adjust “Dot Phase” on the Adjust Signal... menu of the Signal
menu properly (see page 22).
Symptom Cause and Remedy
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony vpl cx21 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony vpl cx21 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony vpl cx21

Sony vpl cx21 Quick start guide - English, German, French, Italian, Spanish - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info