474753

Sony Vegas Movie Studio HD Platinum 10.0 Manual

56
Zoom out
Zoom in
Previous page
1/62
Next page
Assigning tracks to surround channels
Each track can be assigned to the front, center, LFE, or rear channels, or you can pan a track freely within the soundfield.
Right-click the surround panner in the track header and choose a command from the shortcut menu to choose a surround pan
mode:
Mode Function
Surround Pan Used to pan a track anywhere among the front, center, LFE, or rear channels. Drag the orange pan
point in the surround panner to indicate where the track’s audio should be sent.
You can use a pan envelope to automate left/right panning (front/rear panning cannot be
automated).
Front Only Used for the front-left and front-right channels. You can use a pan envelope to pan between the
right and left channels.
Center Only Used for the center channel. No panning is available.
LFE Only Used for the low-frequency effects channel (subwoofer). No panning is available.
Rear Only Used for the rear-left and rear-right channels. You can use a pan envelope to pan between the
right and left channels.
Panning a track
You can perform surround panning using any of the following methods:
• Assign a track to the front, center, LFE, or rear channels. When a track is assigned to a channel, its audio output is sent to the
selected channel. For more information, see Assigning tracks to surround channels on page 50.
• If a track is set to Front, Rear, or Surround Pan mode, you can use a pan envelope to adjust left/right panning. Pan envelopes
are not used when a track is set to Center or LFE mode.
• If a track is not set to Front, Center, LFE, or Rear mode, use the surround panner in the track header.
Panning a track in Surround Pan mode
Drag the orange pan point in the surround panner window to position the sound within the soundfield.
You can drag the orange pan dot to any position
in the soundfield.
The Voice track is panned near the center.
The Music track is panned to the left-front
speaker.
The Sound Effects track is panned to the right-
rear speaker.
Tips:
• Double-click the pan point to reset it to the center listening position.
• Keyboard and mouse shortcuts can help you position the pan point quickly and accurately. For more information about keyboard
shortcuts, see the online help (from the Vegas Movie Studio Help menu, choose Contents and Index).
Automating panning with envelopes
If a track is set to Front, Rear, or Surround Pan mode, you can use a pan envelope to adjust left/right panning.
1.
Select the track you want to pan.
2.
From the Insert menu, choose Audio Envelopes, and then choose Pan from the submenu.
3.
Add points and adjust the envelope set edit panning throughout the track.
The pan envelope is added to the left/right position of the pan point (front/rear panning cannot be automated).
For example, if a track’s pan point is set to 10% left and the pan envelope point is set to 10% right, the sound will be played
through the center at the envelope point.
For more information about adjusting envelopes, see the online help (from the Vegas Movie Studio Help menu, and choose
Contents and Index).
50
| CHAPTER 5
… 56 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony Vegas Movie Studio HD Platinum 10.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony Vegas Movie Studio HD Platinum 10.0 in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info