499134
10
Zoom out
Zoom in
Previous page
1/60
Next page
Advanced Recording Operations
10
EN
Inserting a Blank Space During
Recording (Record Muting)
You can insert a blank space of 4 seconds between each
track. The blank spaces between tracks let you locate
the track easily with the Multi-AMS function (see page
8). Also, use this function to eliminate only unwanted
portions on the tape.
1 Start recording.
2 Press R REC MUTE once when you want to
insert a blank space.
“REC” in the display starts flashing and the tape
moves on without recording any signals.
After 4 seconds, “P” lights up and the tape deck
is now ready to resume recording.
3 Press P PAUSE or · to resume recording.
z To insert a blank space longer than 4 seconds
Hold down R REC MUTE as long as you want. After
4 seconds, “REC” in the display flashes faster.
When you release the R REC MUTE , “P” lights up and
the tape deck is ready to resume recording.
Press P PAUSE or · to resume recording.
z To insert a blank space of less than 4 seconds
After pressing R REC MUTE, press P PAUSE at any
time. The deck changes to recording pause. To resume
recording, press r REC instead of P PAUSE.
§
º
REC MUTE
PAUSE
REC
π
·
OFF
L R
MPX
FILTER
DOLBY NR
BALANCE
AUTO CAL
EJECT
REC LEVEL
0
1
2
3
4
5
6
7
8
9
10
MEMORY
CC
B
B
SS
AMS AMS
RESET
COUNTER
PHONES
P PAUSE
·
R REC MUTE
U
Additional Information
Precautions
On safety
Do not disassemble the cabinet — this may result in an
electrical shock. Refer servicing to qualified personnel
only.
Should any solid object or liquid fall into the cabinet,
unplug the tape deck and have it checked by qualified
personnel before operating it any further.
On power sources
Before operating the tape deck, check that the operating
voltage of the tape deck is identical with your local power
supply. The operating voltage is indicated on the
nameplate at the rear of the tape deck.
If you are not going to use the tape deck for a long time,
be sure to disconnect the tape deck from the wall outlet.
To disconnect the AC power cord (mains lead), grasp the
plug itself; never pull the cord.
AC power cord must be changed only at the qualified
service shop.
The unit is not disconnected from the AC power source
(mains) as long as it is connected to the wall outlet, even if
the unit itself has been turned off.
On operation
Because of a safety mechanism, the function buttons will
not operate if the cassette holder is not completely closed,
if there is no cassette in the cassette holder, or if a cassette
has been incorrectly inserted into the cassette holder.
Be sure to stop the tape before turning off the tape deck.
Otherwise, the tape may be damaged.
On placement
Place the tape deck in a location with adequate ventilation
to prevent heat build-up in the tape deck.
Do not place the tape deck:
on a soft surface such as a rug that might block the
ventilation holes on the bottom.
in a location near heat sources.
in a place subject to direct sunlight.
in an inclined position.
in a place subject to excessive dust or mechanical shock.
On cleaning the tape deck
Clean the cabinet, panel and controls with a soft cloth
slightly moistened with a mild detergent solution. Do not
use any type of abrasive pad, scouring powder or solvent
such as alcohol or benzine.
If you have any questions or problems concerning your
tape deck, please consult your nearest Sony dealer.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony TC-KB820S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony TC-KB820S in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony TC-KB820S

Sony TC-KB820S User Manual - German, Dutch, Italian - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info