Manual Sony TC-377 STEREO TAPECORDER (page 23 of 59) (English, German, Dutch, French)

645864

Zoom out

Zoom in

1/59

STEREO

RECORDING

Connect the desired source

program

the

Line inputs

Micro-

phone

inputs. ReÍer

"CONNECTIONS"

page

Í. Turn on

the

Model TC-377

(and

source equipment) and the

LEVEL meters

will illuminate. Thread the tape with side 1 up.

2. Set

the

TAPE SELECT

switch to either the SPECIAL or

NORMAL:

Set it to SPECIAL when SONY Low-noise High-

output tape or equivalent is used and

NORMAL when

standard tape is used.

3. Set

the

MONITOR

switches to

SOURCE.

4. Select

the tape speed.

5. Adjust

the recording

level.

Turn

the Record volume controls:

The

input

level

through the LINE lNputs

can be

adjusted with

the upper two control knobs marked LINE-L

and

LINE-.R

;

the

input level through the MICROPHONE inputs

can be adjusted

with the lower two control knobs marked MIC-L

and

MIC-R.

ln either case, adjust the level so

that the

needles

of the

LEVEL meters do not

into

the

red

area except on

program

peaks.

6. Set

the

Tape

counter reset button to

quickly

locate the

starting

point

of the tape

playback.

While depressing the

RECORD levers,

set the Function selector

(FWD).

Recording of side 1

(tracks

1 and 3) begins. The lamps

above the

LEVEL

meters will illuminate in red, indicating

that the recorder

in record mode.

When

the recording is finished, set

the

Function

selector to

(sToP).

To record on side 2

(tracks

and 2), do not rewind the tape.

Reverse reel

positions

and repeat

step 7.

When side

recording

finished, do not rewind

the tape but

reverse reel

positions.

Then the tape will be ready

for

playback

of tracks 1 and

Monitor while recording

The

professional

feature

of separate record and

playback

heads

permits

monitoring of

tape during recording

by setting the

MONITOR switch

to TAPE. With the case of

a stereo headphone,

instantaneous

comparison of source and

tape is

possible

setting the MONITOR switches

alternately to SOURCE

and

ïAPE: The

source signal is monitored when

the switches

are

in SOURCE.

The recorded signal

(playback

head

output) is

monitored when

the swítches are in TAPE.

.When

the amplifier being used is

equipped with a tape monitor

selector, source/tape comparison

can be done with

the am-

plifier.

ln such case, the MONITOR

switches

on the recorder

should be in TAPE.

NECESITO EL MANUAL DE SERVICIO DE SONY STEREO CASSETTE-CORDER TC-121. GRACIAS Submitted on 15-4-2022 at 21:51
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sony TC-377 STEREO TAPECORDER in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 41,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sony TC-377 STEREO TAPECORDER Manual

Product: