594187

Sony SWR12 - SmartBand 2 Android Manual

8
Zoom out
Zoom in
Previous page
1/21
Next page
To set up your SmartBand 2 using Bluetooth®
1
Make sure that your SmartBand 2 is fully charged.
2
Android™ device: Make sure that you have installed or updated the SmartBand
2 application to the latest version.
3
Turn on your SmartBand 2.
4
Android™ device: Turn on the Bluetooth® function, then scan for Bluetooth®
devices and select SWR12 in the list of available devices.
5
Android™ device: Follow the instructions that appear on the screen. appears
briefly in the status bar and permanently in the Notification panel when a
connection with the SmartBand 2 is active.
You can drag down the status bar to open the Notification panel and get quick access to the
SmartBand 2 application and the Lifelog application.
Reconnecting the SmartBand 2
In cases where a connection gets lost, for example, when the connected Android™
device goes out of range, your SmartBand 2 vibrates 3 times if the out-of-range alert
is turned on, and your SmartBand 2 automatically performs a series of reconnection
attempts if Bluetooth® is turned on. In case the auto-reconnection fails, you can use
the power key to manually force the accessory to try reconnecting, or you can use
NFC to reconnect the two devices.
To force the SmartBand 2 to try reconnecting
•
Briefly press the power key.
To reconnect your SmartBand 2 using NFC
1
Android™ device: Make sure that the NFC function is turned on and that the
screen is active and unlocked.
2
Place the Android™ device over your SmartBand 2 so that the NFC detection
area of each device touches the other.
The SmartBand 2 application opens automatically when your SmartBand 2 connects with
your Android™ device using NFC.
Resetting your SmartBand 2
Reset your SmartBand 2 if it behaves unexpectedly or if you want to connect it to a
new device.
To perform a factory reset
1
Turn off your SmartBand 2.
2
Press and hold down the power key for more than 10 seconds.
If you are pairing the SmartBand 2 with a new Android™ device, your SmartBand 2 may
attempt to reconnect with your previous Android™ device even after a factory reset. Unpair
your SmartBand 2 with the previous device first and then pair it with the new Android™
device.
To unpair your SmartBand 2
1
From the main application screen of your Android™ device, find and tap
SmartBand 2 >
> Forget SmartBand.
2
Tap OK to confirm.
You can also unpair your SmartBand 2 from the Bluetooth® settings of the Android™ device.
8
This is an Internet version of this publication. © Print only for private use.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony SWR12 - SmartBand 2 Android at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony SWR12 - SmartBand 2 Android in the language / languages: English as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony SWR12 - SmartBand 2 Android

Sony SWR12 - SmartBand 2 Android User Manual - German - 25 pages

Sony SWR12 - SmartBand 2 Android User Manual - Dutch - 23 pages

Sony SWR12 - SmartBand 2 Android User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info