601258
51
Zoom out
Zoom in
Previous page
1/64
Next page
Operations Using the Remote RM-LG113
masterpage:Right
lename[C:\Documents and
ettings\pc13\Desktop\J9031715_4255361111DE997U\4255361111\GB08REM_STR-DE997-
U
.fm]
51
US
model name1[STR-DE997]
[4-255-361-11(1)]
Set the remote command mode using the RM
SET UP button and Easy scroll key (PUSH).
Selecting the command mode
You can switch the command mode (AV1 and
AV2) of the remote. If the command mode of the
receiver and the remote is different, you cannot
use the remote to operate the receiver. To
change the command mode of the receiver, see
page 60.
1 Hold down RM SET UP and press ?/1.
2 Move the Easy scroll key (PUSH) to
select “MAIN”.
3 Press PUSH.
4 Move the Easy scroll key (PUSH) to
select “AV1” or “AV2”.
5 Press PUSH.
The indicator lights up once (twice for
AV2), then the command mode switches.
You will be able to see your selection (AV1
or AV2) in the display.
To reset the remote to factory
settings
Press ?/1, AV ?/1 and MASTER VOL – at
the same time.
The indicator flashes 3 times, then goes off.
You can program the remote to control non-
Sony components by changing the code. Once
the control signals have been memorized, you
can use those components as part of your
system.
Furthermore, you can also program the remote
for Sony components that the remote is unable to
control. Note that the remote can only control
components that accept infrared wireless control
signals.
1 Hold down RM SET UP and press
AV ?/1.
The indicator lights up and “IR SET
appears in the display.
2 Move the Easy scroll key (PUSH) to
select the input (including TV ?/1) for
the component you want to control.
For example, if you are going to control a
CD player, select SA-CD.
3 Press PUSH.
4 Press the numeric buttons to enter the
numeric code (or one of the codes if
more than one code exists)
corresponding to the component and
the maker of the component you want
to control.
See the tables on pages 52–54 for
information on the numeric code(s)
corresponding to the component and the
maker of the component (the first digit and
the last two digits of the numeric code
correspond to the category and the maker’s
code respectively.)
5 Press ENTER.
Once the numeric code has been verified,
the indicator slowly flashes twice and the
remote automatically exits the
programming mode.
6 Repeat steps 1 to 5 to control other
components.
Selecting the command
mode of the remote
Programming the remote
continued
GB01COV_STR-DE997-U.book Page 51 Friday, April 2, 2004 11:00 AM
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony STR-DE997 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony STR-DE997 in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info