601263
55
Zoom out
Zoom in
Previous page
1/60
Next page
Additional Information
55
GB
Outdoor FM antenna
Receiver
Ground wire
(not supplied)
To ground
ANTENNA
AM
COAXIAL
FM
75
The FM reception is poor.
Use a 75-ohm coaxial cable (not supplied) to
connect the receiver to an outdoor FM antenna as
shown below. If you connect the receiver to an
outdoor antenna, ground it against lightning. To
prevent a gas explosion, do not connect the ground
wire to a gas pipe.
Radio stations cannot be tuned in.
Check that the antennas are connected securely.
Adjust the antennas and connect an external
antenna if necessary.
The signal strength of the stations is too weak
(when tuning in with automatic tuning). Use
direct tuning.
Make sure you set the tuning interval correctly
(when tuning in AM stations with direct tuning).
No stations have been preset or the preset
stations have been cleared (when tuning by
scanning preset stations). Preset the stations
(page 34).
Press DISPLAY so that the frequency appears in
the display.
RDS does not work.*
Make sure that you’re tuned to an FM RDS
station.
Select a stronger FM station.
The RDS information that you want does not
appear.*
Contact the radio station and find out whether they
actually provide the service in question. If so, the
service may be temporarily out of order.
There is no picture or an unclear picture appears
on the TV screen or monitor.
Select the appropriate function on the receiver.
Set your TV to the appropriate input mode.
Move your TV away from the audio components.
The remote does not function.
The TV/SAT, PHONO, SOURCE, MPX/DUAL,
ANALOG DIRECT, 12 and ON SCREEN
buttons on the remote are not available.
(RM-PP411 only)
The TV/SAT and PHONO buttons on the remote
are not available. (RM-U305C only)
Point the remote at the remote sensor g on the
receiver.
Check that the mode of the remote corresponds
to that of the receiver (pages 38 and 45)
(RM-PP411 only).
Check that you select AV1 as the command
mode of the receiver (page 38) (RM-U305C
only).
Remove any obstacles in the path between the
remote and the receiver.
Replace both batteries in the remote with new
ones, if they are weak.
Make sure you select the correct function on the
remote.
If the remote is set to operate the TV only, use
the remote to select a source or component other
than TV before operating the receiver or other
component.
Press MAIN MENU on the remote before you
use the V/v/B/b buttons for receiver operation
(RM-PP411 only).
* Models of area code CEL, CEK only.
Clearing the receiver’s memory
To clear See
All memorized settings page 17
Customized sound fields page 31
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony STR-DE685 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony STR-DE685 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info