Manual Sony STR-DE345 (page 14 of 110) (English, Dutch, French, Swedish)

51718

Zoom out

Zoom in

1/110

Receiver Operations

Presetting Radio Stations

You’ll most likely want to preset the receiver with the

radio stations you listen to often so that you don’t have

to tune in the station every time. The receiver can store

a total of 30 FM or AM stations. You can store the

stations on preset numbers combining three characters

(A, B, C) and numbers (0 - 9). For example, you can

store a station as preset number A1, B6 or C9, etc.

1 Press TUNER.

The last received station is tuned in.

2 Tune in the station you want.

If you are not familiar with how to tune in a

station, see “Receiving Broadcasts” on the

previous page.

3 Press MEMORY.

“MEMORY” appears for a few seconds.

Do steps 4 to 6 before “MEMORY” goes out.

4 Press SHIFT to select a character (A, B or C).

Each time you press SHIFT, the letter “A”, “B” or

“C” appears in the display.

If “MEMORY” disappears, start again from step 3.

5 Select a preset number by pressing PRESET/PTY

SELECT + or PRESET/PTY SELECT –.

6 Press MEMORY again to store the station.

7 Repeat Steps 2 to 6 to preset other stations.

To change a preset station

Preset a new station on the number you want to change.

Note

If the mains lead is disconnected for about one week, the

preset stations will be cleared from the receiver’s memory,

and you will have to preset the stations again.

n A1 ˜ A2 ˜ … ˜ A0 ˜ B1 ˜ B2 ˜ … ˜ B0 N

n C0 ˜ … ˜ C2 ˜ C1 N

Tuning preset stations (preset tuning)

You can tune directly to a preset station by entering its

preset number. If you don’t know which stations are

preset on which numbers, you can tune by scanning

the preset stations.

1 Press TUNER.

The last received station is tuned in.

2 Press SHIFT to select a character (A, B or C), then

press the number on the remote.

For example, to tune in the station preset as A7,

select A and then press 7.

You can tune by scanning the preset stations

First press TUNER and then press PRESET/PTY

SELECT + or – to select the station you want. Each time

you press the buttons, the preset numbers change as

follows:

Naming preset stations

You can store names (index names), up to 8 characters

long, for your preset stations (except for FM RDS

stations). Once you name a preset station, the name

appears in the display instead of the frequency when

you tune to that preset station. The characters you can

use include letters, numbers and symbols.

1 Tune to the preset station you want to name.

2 Press NAME.

The cursor blinks in the display.

3 Use + or – to select the character you desire.

4 Press MENU </> to move the cursor into position

for the next character.

5 Repeat steps 3 and 4 to enter up to 8 characters.

6 Press ENTER to store the names.

If you make a mistake

Press MENU </> repeatedly so that the character you want

to change blinks in the display, then use + or – to select the

desired character.

Notes

• You can also enter a name of up to 8 characters for

programme sources. Select the programme source you

want and repeat steps 2 to 6 (except 5.1 CH/DVD).

• To clear programme source name, press NAME and then

press the same programme source button. Press ENTER to

delete the name (except TUNER).

DISPLAY

MENU </> NAME

PRESET/PTY SELECT +/–

SHIFT

MEMORYENTER+/–TUNER

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sony STR-DE345 in the language / languages: English, Dutch, French, Swedish as an attachment in your email.

The manual is 1,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sony STR-DE345 Manual

Product: