Help Guide
Wireless Speaker
SRS-XG300
About the indicators
CHARGE indicator (orange)
Note
While the speaker is turned on, it charges the built-in battery as long as the speaker is connected to an AC outlet by the supplied
AC adaptor.
Depending on the usage of the speaker, however, it may take a long time before charging completes. It is recommended that you
turn off the speaker before battery charging.
If the ambient temperature is extremely low or high, the speaker will stop charging the built-in battery for safety reasons. It may
also stop charging if charging continues for a long period of time. If such an event occurs, bring the temperature up or down to an
operating temperature between 5 °C and 35 °C (41 °F and 95 °F), disconnect and reconnect the AC adaptor, and then let the
speaker charge the built-in battery once again.
(power) indicator
Turns off The speaker has completed charging.
Lights up The speaker is being charged.
Flashes slowly The built-in battery is running at 20% or less and needs to be charged.
Flashes 3 times
and turns off
If the CHARGE indicator flashes 3 times and turns off when you turn on the speaker, the built-in
battery is empty and needs to be charged.
Turns off The speaker is turned off.
Lights up
(green) The speaker is turned on.
Lights up
(orange) The speaker is turned off. The speaker is set to the BLUETOOTH standby mode.
Flashes
(green or
orange)
Each time you press the -/+ (volume) buttons, the indicator flashes once in green.
When you operate -/+ (volume) buttons and the volume is set at the lowest (0) or highest (50 for
music playback/15 for phone calling) level, the indicator flashes 3 times in green.
When the (play)/ (call) button and the - (volume) button are pressed and held simultaneously
for about 5 seconds and the Auto Standby function is turned off, the indicator flashes 3 times in
orange.
When the (play)/ (call) button and the - (volume) button are pressed and held simultaneously
for about 5 seconds and the Auto Standby function is turned on, the indicator flashes twice in orange.
When the (play)/ (call) button and the (BLUETOOTH) button are pressed and held
simultaneously for about 2 seconds and the “Priority on Stable Connection” preference is selected for
the BLUETOOTH connection quality, the indicator flashes 3 times in green.
