Help Guide
Wireless Speaker
SRS-XG300
Charging a USB device such as a smartphone or iPhone
You can charge a USB device, such as a smartphone or iPhone, by connecting it to the speaker via USB. Even if the
speaker is not connected to an AC outlet, its built-in battery can supply power to a USB device.
Note
While the speaker is supplying power to the other device, the Auto Standby function is turned off.
Turning off the speakers stops power supply to the connected USB device.
The slowly flashing CHARGE indicator indicates that the built-in battery is running low. In this state, the speaker cannot supply
power to other devices. Charge the speaker.
Music playback through the connected USB cable is not possible.
Do not charge the speaker's built-in battery in places where the speaker is likely to have water splashed on it. The supplied AC
adaptor as well as the jack and ports (USB/AUDIO IN) behind the cap are designed neither for waterproof nor for dustproof.
After you disconnect the USB cable from the speaker upon completion of battery charging, be sure to close the cap securely. The
cap plays a very important role in maintenance of the waterproof and dustproof performance.
Related Topic
Charging the speaker
Turning the power on
Auto Standby (power saving) function
Connect a USB device, such as a smartphone or an iPhone, to the CHARGE OUTPUT port with a USB cable
(commercially available).
1
Turn on the speaker.
The (power) indicator lights up in green and the speaker starts supplying power to the connected USB device for
battery charging.
2
