699866
18
Zoom out
Zoom in
Previous page
1/97
Next page
SNT EX101/SNT EX104/SNT EP104
Operating the unit
Switching Transmission Mode
18
Controlling alarm output
You can control Alarm output.
To use this function, you need to make Alarm output
active in the Trigger menu of the Administrator menu
(page 71).
1
Click Alarm output1 or Alarm output2 on the
Trigger panel.
The alarm output is switched by clicking.
The alarm output mode can be selected from
Toggle or Timer of Alarm output 1, 2 (page 71) in
the Trigger menu.
Tips
For the connection of peripheral devices to the alarm
output of the I/O port, see the supplied Installation
Manual.
The number of alarm outputs varies by model.
The number of selectable alarm output terminals is as
follows:
SNT-EX101/SNT-EX101E: 2
SNT-EX104/SNT-EX154: 4
SNT-EP104/SNT-EP154: None
Playing an audio file stored in the
system
You can play an audio file previously stored in the
system using the SNC audio upload tool.
To use this function, you need to make Voice alert1,
Voice alert2 and Voice alert3 active in the Trigger
menu of the Administrator menu (page 71).
1
Click Voice alert1, Voice alert2 or Voice alert3
on the Trigger panel.
Playback of the selected audio file starts and the
playback sound is output from the speaker
connected to the system.
Notes
This operation is not available on the SNT-EP104 or
SNT-EP154.
Voice alert configuration is only available for CH1 on
the SNT-EX154.
Switching Transmission
Mode
You can select the Transmission mode for video/audio
data.
This function can be used when Mode (video codec
mode) is set to MPEG4 or H.264 and the ActiveX
Viewer is used.
Note
The function may not operate correctly if you use
personal firewall software or antivirus software on your
computer. In that case, disable the software or select the
TCP mode.
1
Select TCP, Unicast or Multicast from the
Connection drop-down list in the Others panel.
TCP: This is normally selected.
When TCP is selected, HTTP communication is
adopted for video communications.
HTTP is the protocol used for reading the usual
Web page.
In an environment capable of reading Web pages,
you can watch video by selecting the TCP port.
Unicast: When Unicast is selected, RTP (Real-
time Transport Protocol) is adopted for video
communications. Since RTP is the protocol for
running video data, the video playback is smoother
than when TCP (HTTP) is selected. If a firewall is
installed between the camera and the computer, or
depending on the network environment, video may
not play back properly when Unicast is selected. In
this case, select TCP.
Multicast: This protocol is selectable when
Multicast streaming (page 32) is On. When
Multicast is selected, RTP (Real-time Transport
Protocol) and UDP multicast techniques are
adopted for video transmission. By selecting it, the
network transmission load of the camera can be
reduced. If a router that does not correspond to a
multicast or firewall is installed between the
camera and the computer, video may not play back
properly. In this case, select TCP or Unicast.
Note
When you are connected to a Proxy server, Unicast
or Multicast cannot be selected.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony SNT-EP154 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony SNT-EP154 in the language / languages: English as an attachment in your email.

The manual is 3,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony SNT-EP154

Sony SNT-EP154 User Manual - German - 107 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info