699859
49
Zoom out
Zoom in
Previous page
1/73
Next page
Administrating the Camera
Setting the PTZF control — PTZF control Menu
49
Enable
Select the checkbox to enable the auto flip function.
When you hold , or on the control panel to
make the direction of the camera pass through the point
where it faces the ground, the auto flip function is
activated, and the displayed picture is reversed.
When you deselect the checkbox, the direction of the
camera stops at the point where it faces the ground.
Latency
While Auto flip is set to On, set the time duration before
restarting tilt when the direction of the camera has tilted
completely downward.
Selectable values are 0 sec., 0.5 sec. are 0.75 sec.
Panorama mode
Select to rotate or not rotate the panorama image
displayed in the viewer in accordance with the pan
movement of the camera.
Rotate: The panorama image rotates as the camera
pans.
Fixed: The panorama image is fixed.
Zoom mode
Select the zoom mode.
Full: An image can be zoomed up to 30× optical zoom
and 12× digital zoom, 360× zoom in total.
Optical: An image can be zoomed up to 30× optical
zoom.
Focus mode
Select the focus mode.
Auto: The focus is automatically adjusted.
Manual: The focus can be adjusted by using the ,
and buttons of the control panel
displayed in the main viewer.
Horizontal tilt limit
Limit the tilting of the camera so the tilt does not lean
over the horizontal position to the camera side.
When Horizontal tilt limit is set to On, the camera does
not lean past the horizontal position on the camera side.
Focus near limit
Set the range at which to automatically focus. If a
subject is nearer than the set range, it will not be
focused.
Preset position Tab — Saving pan/
tilt/zoom position
You can set up camera pan, tilt and zoom positions to
256 positions.
Preview screen
This screen is for monitoring images and setting preset.
Set
Click to save a selected position, such as pan, tilt or
zoom positions in the preset. If Home is selected, the
position you saved will be assigned as the home
position.
Call
Move to the pan, tilt and zoom positions saved in the
selected preset.
Reset
If you click this when Home is selected, the home
position will be reset to the factory setting.
Add
Save the current pan, tilt and zoom positions as a new
preset.
Remove
Delete the selected preset.
Rename
Change the name of a selected preset.
Thumbnail
Check this checkbox to registers a thumbnail.
Select a radio button to determine whether to register the
current camera image as a thumbnail or to register with
a specified image.
To specify an image, click Browse.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony SNC-WR602C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony SNC-WR602C in the language / languages: English as an attachment in your email.

The manual is 2,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony SNC-WR602C

Sony SNC-WR602C User Manual - German - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info