699839
12
Zoom out
Zoom in
Previous page
1/51
Next page
12
Client settings
This section explains how to select the stream
transfer mode and the saving options on the local
computer. When the settings are completed, click
Save at the lower part of the page to enable the
settings.
H.265/H.264 media options
Select the video data, audio data, or the both to
stream. This option becomes active when the
video mode is set to H.265 or H.264.
H.265/H.264 protocol options
The communication method of the video/audio
data can be switched.
Note
The function may not operate correctly if you use
personal firewall software or antivirus software on
your computer. In that case, disable the software or
select the TCP mode.
H.265/H.264 streaming has four transfer modes
depending on the network environment.
UDP Unicast: When UDP Unicast is selected, RTP
(Real-time Transport Protocol) is adopted for
video/audio communications. RTP is the protocol
for real-time video/audio streaming. However
video/audio may not be played back properly
because of the loss of the network packets
depending on the network traffic. In such case,
select TCP.
UDP Multicast: This protocol allows multicast-
enabled routers to forward network packets to all
clients requesting streaming media. This helps to
reduce the network transmission load of the
Network Camera while serving multiple clients at
the same time. However, in case that the router
that does support multicast or firewall is installed
between the camera and the computer, video/
audio may not be played back properly. In such a
case, select TCP or UDP Unicast. When this
protocol is used, check Always multicast in
“streaming protocols > RTSP”.
TCP: The TCP communication is adopted for video/
audio communications. When TCP is selected, the
video/audio is transmitted via the port number
specified in “RTSP port” (page 26) of “Network >
Streaming protocols”
This protocol guarantees the complete delivery of
streaming data and thus provides better video
quality. The downside of this protocol is that its
real-time effect is not as good as that of the UDP
protocol.
HTTP: When HTTP is selected, HTTP
communication is adopted for video/audio
communications. HTTP is the protocol usually used
for reading web pages. In an environment capable
of reading web pages, you can watch or listen to
video/audio by selecting the HTTP port.
Notes
When connecting via a proxy server, neither UDP
Unicast nor UDP Multicast can be selected.
The multicast streaming should be enabled to
use UDP Multicast function. For details, refer to
“RTSP streaming” (page 26).
•Select HTTP to use the SSL function.
When the image codec is set to JPEG, HTTP is
selected for the connection.
Two way audio
Half-duplex
Audio is transmitted from one direction at a time.
Full-duplex
Audio is transmitted in both directions
simultaneously.
Local streaming buffer time
In the case of encountering unsteady bandwidth,
live streaming may lag and video streaming may
not be very smoothly.
If you enable this option, the live streaming will be
stored temporarily on your PC’s cache memory for
a few milliseconds before being played on the live
viewing window. This will help you see the
streaming more smoothly. If you enter 3,000
Millisecond, the streaming will delay for 3 seconds.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony SNC-WL862 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony SNC-WL862 in the language / languages: English as an attachment in your email.

The manual is 3,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony SNC-WL862

Sony SNC-WL862 User Manual - German - 56 pages

Sony SNC-WL862 User Manual - French - 54 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info