699840
47
Zoom out
Zoom in
Previous page
1/68
Next page
Administrating the Camera
Action input Menu — Setting the Sensor input/Camera tampering detection/Motion detection
47
Notes
Adjust Focus/Zoom or images, before using camera
tampering detection.
If you perform them during camera tampering
detection, it may cause mis-detection.
When the output mode is set to HDMI, 4K 25fps, or
4K 30fps, this function cannot be set.
Enable
Select the checkbox to activate the function to detect
camera tampering, such as direction shifting or spray.
Detection status
Display the tampering detection state of the time when
Camera tampering detection tab is opened. To clear the
detection status, click Clear button.
Motion detection Tab — Set the
motion/VMF detection
Motion detection responds to moving objects in the
camera image and triggers an alarm.
In VMF, an alarm sounds when motion is detected under
the motion detection setting, entering or passing through
a specified area or inspection line. An alarm also sounds
when an object has been left or removed from a specified
area or inspection line.
The detected object will be displayed on the monitor in
the green frame. The removed object and left object will
be displayed in the magenta frame.
When you click the Motion detection tab, the
authentication dialog appears. Enter the user name and
password.
The user name “admin” and password “admin” are set at
the factory for the Administrator.
Change the password from the factory setting for the
security of your devices.
Notes
•Set Image size 1 in the Video codec tab of the Video/
Audio menu to the maximum rate before setting the
motion detection.
When the output mode is set to HDMI, 4K 25fps, or
4K 30fps, this function cannot be set.
What is VMF
VMF stands for Video Motion Filter.
VMF is a function for detecting an object entering or
passing through a specified area or inspection line, or
when an object has been left or removed from a specified
area or inspection line. Video/audio recording can be
performed synchronized with this alarm.
You can set the inspection methods to execute
independently. Intrusion and Passing can also be set to
execute in combination.
For example:
An alarm sounds when an object enters areas A, B and
C.
An alarm sounds when an object passes through area
A and enters area B.
An alarm sounds when an object passes through areas
A and B, and enters area C.
An alarm sounds when an object enters area A, and
passes through area B.
Intrusion
When a moving object enters the designated area, an
alarm sounds.
Passing
A passage line is determined, and when a moving object
passes the setting line, an alarm sounds.
Existing
Alarm will be triggered if the moving object that broke
in remains within the set area for specified duration.
Disappearance
Alarm will be triggered if the moving object that broke
in disappears from the set area.
Capacity
Alarm will be triggered if the number of moving objects
that broke in is more than the specified capacity.
Left object
When a moving object has been left in the designated
area, an alarm sounds.
Removed object
When a moving object has been removed from the
designated area, an alarm sounds.
Notes
Before actual use, perform an operation test and
confirm that the motion detection function works
correctly.
When the privacy masking is used, detection is not
performed in the masked area.
If the Wide dynamic range is selected, settings other
than left/removed are available as VMF filters.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony SNC-VB770 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony SNC-VB770 in the language / languages: English as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony SNC-VB770

Sony SNC-VB770 User Manual - German - 75 pages

Sony SNC-VB770 User Manual - French - 73 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info