699851
83
Zoom out
Zoom in
Previous page
1/99
Next page
SNC-EP520/EP521/EP550/EP580/ER520/ER521/ER550/ER580/ER585/ER585H/ZP550/ZR550
Administrating the Camera
Setting the Sensor input/Camera tampering detection/Motion detection — Event detection menu
83
Camera tampering detection tab —
Set the camera tampering detection
Camera tampering detection
Select On to activate the function to detect the camera
tampering, such as direction shifting or spray. When you
select On, you can select the Sensitivity.
Sensitivity: Set the sensitivity of camera tampering
detection High, Middle or Low.
Detection status: Display the tampering detection state
of the time when Camera tampering detection tab is
opened. To clear the detection status, click Clear
button.
Note
Using the Privacy masking function reduces the
sensitivity of camera tampering detection. When camera
tampering detection does not work, set the sensitivity
higher. When a screen is masked more than 60%, the
camera tampering detection will refuse to respond even
if Sensitivity is set to High. Test this function before
using it.
OK/Cancel
See “Buttons common to every menu” on page 26.
Motion detection tab — Set the
motion detection
Motion detection detects moving objects in the camera
image and outputs an alarm.
Notes
Before actual use, perform an operation test and
confirm that the motion detection function works
correctly.
Using the Privacy masking function disables the
Motion detection function for the masked area.
The Motion detection menu may not be displayed
depending on the function settings. To display the
Motion detection menu, configure as follows.
Installation tab in the System menu (page 32)
Video out: Off (SNC-ZP550/ZR550)
Camera menu-Video codec tab (page 40)
Letterbox: Off. (SNC-EP550/EP580/ER550/
ER580/ER585/ER585H/ZP550/ZR550)
Cropping: Off. (SNC-EP550/EP580/ER550/
ER580/ER585/ER585H/ZP550/ZR550)
Codec of Image 2: Off.
The motion detection function deactivates during PTZ
control, and also while the camera is moving to a
preset position. Once PTZ control is completed or the
camera arrives at the preset position, the motion
detection function reactivates.
When the Motion detection menu is
displayed for the first time
When you click Motion detection, “Security Warning”
is displayed.
When you click Yes , ActiveX control is installed and the
Motion detection menu is displayed.
Notes
If Automatic configuration is enabled in the Local
Area Network (LAN) settings of Internet Explorer, the
image may not be displayed. In that case, disable
Automatic configuration and set the Proxy server
manually. For the setting of the Proxy server, consult
your network administrator.
When you install ActiveX control, you should be
logged in to the computer as Administrator.
Setting items for motion detection
Use the settings tab to set the conditions for the motion
detection function while observing camera images. This
menu is the same as the settings menu displayed when
you click Detection on Alarm transmission on the
e-Mail (SMTP) menu, or on the FTP client menu.
Click the desired item in the setting item list to set the
respective detection area.
Monitor screen
Setting item list Setting area
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony SNC-ER585H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony SNC-ER585H in the language / languages: English as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony SNC-ER585H

Sony SNC-ER585H User Manual - German - 109 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info