699850
33
Zoom out
Zoom in
Previous page
1/99
Next page
SNC-EP520/EP521/EP550/EP580/ER520/ER521/ER550/ER580/ER585/ER585H/ZP550/ZR550
Administrating the Camera
Configuring the System — System Menu
33
Initialize Tab
Display sample: SNC-ER580
Reboot
Used when rebooting the system.
Click Reboot, and the message “This System will be
rebooted. Are you sure?” appears. Click OK to reboot
the camera. It takes about two minutes to restart.
Factory default
Resets the camera to the factory settings.
Retain current network settings
When this item is checked, only the current network
settings will be retained after reset.
Click Factory default, and the message “Setup data will
be initialized. Are you sure?” appears. When you click
OK, the network indicator on the camera starts to blink.
After adjustments of the default settings have finished,
the camera reboots automatically. Do not turn off the
camera until the camera reboots.
Tip
The camera can also be reset to the factory settings by
turning on the power of this unit while pressing the reset
button on the camera. For details, see the supplied
Installation Manual.
Backup setting data
Saves the setting data of the camera in a file.
Click Save, and follow the instructions on the Web
browser to specify the folder and save the setting data of
the camera.
The file name preset at the factory is “snc-ep520.cfg” for
SNC-EP520.
Restore setting
Loads the stored setting data of the camera.
Click Browse and select the file in which the setting data
is stored. Click OK, and the camera is adjusted
according to the loaded data, and restarted.
Restore preset position and privacy masking
settings
If you select this, the stored setting data of the camera,
the preset position data and privacy masking data are
loaded.
Notes
With Restore setting, some items in the Network
menu (page 43) cannot be restored.
•When Restore preset position and privacy masking
settings is selected, loading of setting data may take
some time.
The following items cannot be stored or restored with
Backup setting data or Restore setting.
audio files uploaded using SNC audio upload tool
a panorama image recorded in the camera using
Panorama Creator of SNC toolbox
a homepage created using Custom Homepage of
SNC toolbox
a client certificate and CA certificate to be used in
the 802.1X authentication function
Thumbnail
Header logo
Camera ID image
a certificate to be used in the SSL function
Video & PT drive refresh (SNC-ER520/
ER521/ER550/ER580/ER585/ER585H/
ZR550)
Image distortion and misalignment of the pan/tilt
position may occur during extended periods of use.
Select On to correct image distortion and pan/tilt
misalignment.
Video & PT drive refresh takes about 20 seconds to
complete. Pan/tilt operations for the camera are
performed automatically during the refresh operation.
After refresh is completed, the pan/tilt position returns
to that at the start of the refresh operation.
Manual
Click Refresh, and panning and tilting starts
automatically.
Schedule
Refresh interval
The refresh interval for the video & PT drive should
be set periodically. The interval can be set between
30 minutes and 24 hours (one day).
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony SNC-ER585 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony SNC-ER585 in the language / languages: English as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony SNC-ER585

Sony SNC-ER585 User Manual - German - 109 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info