699848
103
Zoom out
Zoom in
Previous page
1/109
Next page
Sonstiges
Verwendung von SNMP
103
SNC EP520/EP521/EP550/EP580/ER520/ER521/ER550/ER580/ER585/ER585H/ZP550/ZR550
1) sysLocation=<string>
Geben Sie den Fall von „mib-
2.system.sysLocation.0“ an der Position <string>
ein. Die maximale Länge von <string> ist 255
Zeichen.
2) sysContact=<string>
Geben Sie den Fall von „mib-
2.system.sysContact.0“ an der Position <string>
ein. Die maximale Länge von <string> ist 255
Zeichen.
3) sysName=<string>
Geben Sie den Fall von „mib-2.system.sysName.0“
an der Position <string> ein. Die maximale Länge
von <string> ist 255 Zeichen.
4) enaAuthTraps=<value>
Geben Sie den Fall von „mib-2.snmp.snmp
EnableAuthenTraps.0“ an der Position <string>
ein. Geben Sie „1“ (aktivieren) oder „2“
(deaktivieren) in der Position <value> ein.
5) community=<ID>,r,
<communityName>,<IpAddressString>
Stellen Sie die Gemeinschaftsattribute ein. <ID>
beschreibt die Einstellungs-Kennnummer (1 bis 8)
<communityName> beschreibt den
einzustellenden Gemeinschaftsnamen, und
<IpAddressString> beschreibt die IP-Adresse des
Hosts, dem der Zugriff gestattet wird (0.0.0.0 für
einen beliebigen Host).
Beispiel: Um Lesen durch jeden Host in der
Gemeinschaft „private“ mit der Kennnummer
„2“ zu gestatten.
community=2,r,private,0.0.0.0
6) trap=<ID>,<communityName>,
<IpAddressString>
Stellen Sie die Attribute ein, denen Sie
Auffangroutinen zusenden wollen. <ID> beschreibt
die Einstellungs-Identifizierungsnummer (1 bis 8),
<communityName> beschreibt den
Gemeinschaftsnamen, dem Auffangroutinen
zugesendet werden sollen, und <IpAddressString>
beschreibt die IP-Adresse des Hosts, dem
Auffangroutinen zugesendet werden sollen.
Beispiel: Angabe des Auffangroutinenziels als
Gemeinschaft „public“ und mit der
Kennnummer „1“.
trap=1,public,192.168.0.101
7) delcommunity=<ID>
Dieser Parameter wird verwendet, um die vorherige
Gemeinschaftseinstellung zu löschen. <ID>
beschreibt die Gemeinschaftseinstellungs-
Identifizierungsnummer (1 bis 8).
8) deltrap=<ID>
Dieser Parameter wird verwendet, um die vorherige
Einstellung des Host zu löschen, an den
Auffangroutinen gesendet werden. <ID> beschreibt
die Auffangroutineneinstellungs-
Identifizierungsnummer (1 bis 8).
Wenn Sie mit der Änderung der SNMP-
Einstellungsinformationen unter Verwendung der
obigen Parameter 1) bis 8) fertig sind, überprüfen Sie die
geänderten Einstellungen mithilfe eines Abfragebefehls.
Wenn die geänderten Einstellungen mit „OK“ bestätigt
wurden, führen Sie einen SNMP-Neustart mit dem
folgenden CGI-Befehl durch.
SNMP-Neustartbefehl
<Methode>
GET, POST
<Befehl>
103


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony SNC-ER550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony SNC-ER550 in the language / languages: German as an attachment in your email.

The manual is 3,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony SNC-ER550

Sony SNC-ER550 User Manual - English - 99 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info