699842
29
Zoom out
Zoom in
Previous page
1/99
Next page
SNC-EP520/EP521/EP550/EP580/ER520/ER521/ER550/ER580/ER585/ER585H/ZP550/ZR550
Administrating the Camera
Configuring the System — System Menu
29
Operation time
Sets the time length for a user who has control authority.
The selectable range is from 10 to 600 seconds. This is
effective when Exclusive control mode is set to On.
Maximum wait number
Sets the number of users who are permitted to wait for
their turn for control authority during operation by one
user. The selectable number is from 0 to 5. This is
effective when Exclusive control mode is set to On.
Notes
To use Exclusive control mode, the date and time of
the camera and the connected computer must be set
correctly first.
To use Exclusive control mode, do not disable the
Web browser Cookie. If it is disabled, this mode
cannot be used.
When you change the Exclusive control mode
setting, click Refresh on the Web browser to reflect
the change when opening the main viewer page.
PTZ mode
Select the pan/tilt control mode using the 8-direction
arrow buttons (page 18) and the zoom control mode
using the / buttons (page 19).
Select Normal or Step.
Normal: When you click the mouse button, the camera
starts panning, tilting or zooming, and the operation
continues while you hold down the mouse button. To
stop the operation, release the mouse button.
Step: Each time you click the mouse button, the camera
moves (pans, tilts or zooms). If you keep the mouse
button held down for more than 1 second, the
operation mode is temporarily changed to Normal.
When you release the mouse button, camera
operation stops and the Step mode is restored.
When you select Step, Pan/Tilt level and Zoom level
are selectable.
Pan/Tilt level: Select the camera transition level from 1
to 10 by clicking the 8-direction arrow buttons for
panning/tilting. Selecting 10 provides the maximum
transition level.
Zoom level: Select the camera transition level from 1 to
10 by clicking / for zooming. Selecting 10
provides the maximum transition level.
Auto flip (SNC-ER520/ER521/ER550/
ER580/ER585/ER585H/ZR550)
This function automatically switches the tilt movement
of the camera downward to upward when the camera
tilts downward to the point where it faces the ground.
On: When you are tilting the camera downward using
the , or buttons on the control panel, and
the camera reaches the point where it faces the
ground, it automatically starts tilting upward.
Off: When the camera tilts to the point where it faces the
ground, tilting stops.
Latency
While Auto flip is set to On, set the time duration before
restarting tilt when the camera has tilted completely
downward.
Selectable values are 0 sec., 0.5 sec. are 0.75 sec.
Horizontal tilt limit
You can limit the tilt movement to not go beyond
horizontal level.
Panorama mode (SNC-ER520/ER521/
ER550/ER580/ER585/ER585H/ZR550)
Select to rotate or not rotate the panorama image
displayed in the viewer in accordance with the pan
movement of the camera.
Rotate: The panorama image rotates as the camera
pans.
Fixed: The panorama image is fixed.
OK/Cancel
See “Buttons common to every menu” on page 26.
Date & time Tab
Current date & time
Displays the date and time set on the camera.
Note
After you have purchased the camera, be sure to check
the date and time of the camera and set as necessary.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony SNC-EP520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony SNC-EP520 in the language / languages: English as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony SNC-EP520

Sony SNC-EP520 User Manual - German - 109 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info