699444
32
Zoom out
Zoom in
Previous page
1/80
Next page
Administrating the Camera
Setting the Camera Image and Audio — Video / Audio Menu Setting the Camera Image — Video Menu
32
Note
Focus will move out of position after the adjustment of
the zoom and zoom position. Perform focus adjustment.
Video codec Tab
Use this tab to set the items for the video codec.
Full HD dual stream mode
Supported models: SNC-VB635/VB630/VB632D/
VB640/VB642D/VM630/VM631/VM632R/VM641/
VM642R/EB630/EB630B/EB632R/EB640/EB642R/
EM630/EM631/EM632R/EM641/EM642R/XM636/
XM632/XM631/XM637
When you set this On, the highest resolution which can
be set on Image 2 will be 1920 × 1080.
When you set this Off, the highest resolution which can
be set on Image 2 will be 1280 × 720.
Notes
When you set this On, the image rotate setting cannot
be changed to 90 degrees or 270 degrees.
When you set this On, High framerate mode cannot be
set to On. (SNC-VB635/VB630/VB632D/VB640/
VB642D/VM630/VM631/VM641/VM642R/EB640/
EB642R/EM641/EM642R/VM632R)
High framerate mode
Supported models: SNC-VB635/VB630/VB600/
VB632D/VB640/VB642D/VM630/VM600/VM631/
VM601/VM632R/VM641/VM642R/EB640/EB642R/
EM641/EM642R/VM602R
When the setting is set to On, set the maximum frame
rate to 60 fps (NTSC) or 50 fps (PAL).
When the setting is set to Off, the maximum frame rate
is 30 fps (NTSC) or 25 fps (PAL).
For details about how to switch NTSC/PAL, refer to the
supplied Installation Manual.
Notes
When the setting is set to On, Image 2 may not be
available, and Image 3 is not available.
When the high framerate mode setting is changed,
settings for Image 1, Image 2, and Image 3 are
returned to the default settings.
•When Wide dynamic range (View-DR) level in the
Picture tab of the Video / Audio menu is set to High,
you cannot select On. (SNC-VB600/VM600/VM601/
VM602R)
When Wide dynamic range (View-DR) in the
Picture tab of the Video / Audio menu is set, you
cannot select On. (SNC-VB635/VB630/VB632D/
VB640/VB642D/VM630/VM631/VM641/VM642R/
EB640/EB642R/EM641/EM642R/VM632R)
When you set this On, Full HD dual stream mode
cannot be set to On. (SNC-VB635/VB630/VB632D/
VB640/VB642D/VM630/VM631/VM641/VM642R/
EB640/EB642R/EM641/EM642R/VM632R)
Image 1, Image 2 and Image 3
Up to three image codec modes can be set. Configure the
following setting for each image mode.
Image codec
Select H.264, JPEG or Off. Note that Image 1 cannot be
set to Off.
Note
The selectable size of images and frame rate for Image
2 and Image 3 may be limited, depending on the setting
of codec type, image size, frame rate, and image quality
for Image 1.
The total of frame rate for Image 1, Image 2 and Image
3 should not exceed 60 fps.
If you set the bitrate of Image 1 to 32000 kbps, set
Image 2 and Image 3 to Off.
If you set the bitrate of Image 1 to 16000 kbps or
faster, set the bitrate of Image 2 and Image 3 below
4000 kbps.
If you set a value exceeding the standard, the following
symptoms may occur.
The image delays more than usual.
The frame is skipped when playing an image.
The voice is broken.
The response of the camera to commands delays.
Image size
You can select the size of images sent from the camera.
Notes
Some parts of the screen may not be displayed
depending on the image size.
If the image size is 720 × 574 or 720 × 480, the full
image is displayed but not in the 1:1 pixel aspect ratio.
Frame rate
Set the frame rate of the image.
“fps” is a unit indicating the number of frames
transmitted per second.
The frame rate of JPEG image can be changed by the
setting of Image quality.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony SNC-EM631 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony SNC-EM631 in the language / languages: English as an attachment in your email.

The manual is 2,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony SNC-EM631

Sony SNC-EM631 User Manual - German - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info