699439
26
Zoom out
Zoom in
Previous page
1/80
Next page
Administrating the Camera
Configuring the System — System Menu
26
Select On/Off according to the type of installation, such
as on a ceiling, or on a rack, etc.
Note
When the Eflip setting is changed, the settings in the
Video codec tab of the Video / Audio menu or the Video
menu are initialized.
Image rotate
You can display the rotated images on the computer. The
rotation angle can be selected from 0 degree, 90 degree,
and 270 degree.
Notes
•When the Image rotate settings are changed, the
settings in the Video codec tab of the Video / Audio
menu or the Video menu are initialized.
•When the Image rotate is set to 90 degrees or
270 degrees, the Solid PTZ and Zoom mode settings
cannot be set.
When the Solid PTZ is enabled, the Image rotate
settings cannot be set.
The camera reboots when the Image rotate is
changed between 0 degrees and 90/270 degrees.
•When the Image rotate is set to 90 degrees or
270 degrees, even if the High framerate mode in the
Video codec tab of the Video / Audio menu is set to
On, the frame rate can be set is up to 30 fps (NTSC)
or 25 fps (PAL). (Supported models: SNC-VB635/
VB630/VB600/VB600B/VB632D/VB640/VB642D/
VM630/VM600/VM600B/VM631/VM601/
VM601B/EB640/EB642R)
•When Image rotate is set to 90 degrees or 270
degrees, full HD dual stream mode cannot be turned
On (Supported models: SNC-VB635/VB630/
VB632D/VB640/VB642D/VM630/VM631/
VM632R/EB640/EB642R/EM630/EM631/EM632R/
XM637/XM636/XM632/XM631).
Mirroring
You can display horizontally flipped images on the
computer. Select the checkbox to flip the images
horizontally.
Note
When the Mirroring settings are changed, the settings in
the Video codec tab of the Video / Audio menu or the
Video menu are initialized.
OK/Cancel
See “Buttons common to every menu” on page 23.
Initialize Tab
Reboot
Used when rebooting the system.
Click Reboot, and the message “This System will be
rebooted. Are you sure?” appears. Click OK to reboot
the camera. It takes about two minutes to restart.
Factory default
Resets the camera to the factory settings.
Note
If you adjust the focus after resetting to the factory
settings, the optimal focus position may not be obtained.
Please make sure to perform
Focus reset
on the Focus tab
under Video Menu after resetting to the factory default.
(Supported models: SNC-VB635/VB630/VB600/
VB600B/VB640/EB630/EB600/EB640)
Retain current network settings
When this item is checked, only the current network
settings will be retained after reset.
Click Factory default, and the message “This System
will be rebooted. Are you sure?” appears.
When you click OK, the network indicator on the
camera starts to blink. After adjustments of the default
settings have finished, the camera reboots automatically.
Do not turn off the camera until the camera reboots.
Tip
The camera can also be reset to the factory settings by
turning on the power of this unit while pressing the reset
button on the camera. For details, refer to the supplied
Installation Manual.
Format memory card
You can format a memory card (not supplied) inserted
into the card slot of the camera. When you click Format
memory card, a confirming message appears. Click
OK to start formatting. Any files and folders stored in
the memory card will be deleted.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony SNC-EB602R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony SNC-EB602R in the language / languages: English as an attachment in your email.

The manual is 2,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony SNC-EB602R

Sony SNC-EB602R User Manual - German - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info