59945
108
Zoom out
Zoom in
Previous page
1/120
Next page
108
Troubleshooting
VCR Troubleshooting
Operation
The subtitle language cannot be
changed or turned off.
Try using the DVD’s menu instead of the direct selection
button on the remote (page 66).
Multilingual subtitles are not recorded on the DVD being
played.
The DVD prohibits the changing of the subtitles.
The angles cannot be changed. Try using the DVD’s menu instead of the direct selection
button on the remote (page 66).
Multi-angles are not recorded on the DVD being played.
The DVD prohibits changing of the angles.
The player does not operate properly. When static electricity, etc., causes the player to operate
abnormally, unplug the player.
Symptom Remedy
Playback
The playback picture does not appear
on the TV screen.
Make sure the TV is set to the channel for the VCR. If
you are using a monitor, set it to video input.
If the VCR is connected to the TV with the Scart cable,
make sure the VIDEO indicator is lit in the display
window. Use the TV/VIDEO button on the remote
commander to light up the VIDEO indicator.
The picture is not clear. Existing broadcasts may interfere with the VCR. Reset
the RF channel output of your VCR (page 15).
Adjust the tracking with the TRACKING +/– buttons.
The video heads are dirty (see the last page of
Troubleshooting). Clean the video heads using a Sony
video head cleaning cassette. If a Sony cleaning cassette
is not available in your area, have the heads cleaned at
your nearest Sony service facility (a standard service
charge will be required). Do not use a commercially
available liquid type cleaning cassette other than Sony’s,
as it may damage the video heads.
The video heads may have to be replaced. Consult your
local Sony service facility for more information.
The picture has no colour. The “Colour System” option in the “USER SET” menu is
set to the wrong position. Set the option to conform to the
system that the tape was recorded in.
The picture rolls vertically during
picture search.
Adjust the vertical hold control on the TV or monitor.
The picture has no sound. The tape is defective.
If you made A/V connections, check the audio cord
connection.
The sound from a tape recorded with
the VCR is not in stereo or the
STEREO indicator in the display
window is flashing.
Adjust the tracking.
The video heads are dirty. Clean the video heads using a
Sony video head cleaning cassette as explained above.
Symptom Remedy
108


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony SLVD930 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony SLVD930 in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info