107548
75
Zoom out
Zoom in
Previous page
1/84
Next page
75
Troubleshooting
Additional Information
Additional Information
Troubleshooting
If you have any questions or problems not covered below, please consult your nearest
Sony service facility.
Symptom Remedy
Power
The ?/1 (on/standby)
switch does not function.
Connect the mains lead to the mains securely.
The power is turned on
but the VCR does not
operate.
Moisture condensation has occurred. Turn the power off,
unplug the mains lead and leave the VCR to dry for over
three hours.
The VCR is plugged in
but the display window
remains dark.
Set VEILLE ECO in the RÉGLAGES UTILISATEUR
menu to NON (see page 68).
Clock
The clock has stopped
and “– –:– –” appears in
the display window.
The clock stops if the VCR is disconnected from the mains.
Reset the clock (and timer).
Playback
The playback picture
does not appear on the
TV screen.
Make sure the TV is set to the video channel. If you are
using a monitor, set it to video input.
If the VCR is connected to the TV with the PERITEL
cable, make sure the MAGN or VIDEO indicator is lit in
the display window. Use the t TV/MAGN button on the
remote commander to light up the MAGN or VIDEO
indicator.
The picture is not clear. Adjust the tracking with the CHAINE +/– buttons on the
VCR.
The video heads are dirty (see the last page of
Troubleshooting). Clean the video heads using a Sony
video head cleaning cassette. If a Sony cleaning cassette is
not available in your area, have the heads cleaned at your
nearest Sony service facility (a standard service charge will
be required). Do not use a commercially available liquid
type cleaning cassette other than Sony’s, as it may damage
the video heads.
The video heads may have to be replaced. Consult your
local Sony service facility for more information.
The picture has no
colour.
The SYST. COULEUR option in the RÉGLAGES
UTILISATEUR menu is set to the wrong position. Set the
option to conform to the system that the tape was recorded
in.
continued
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony SLV-SE840B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony SLV-SE840B in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info