614442
2
Zoom out
Zoom in
Previous page
1/68
Next page
2
WARNING
WARNING
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified
personnel only.
The mains lead must only be changed at a
qualified service shop.
Precautions
Safety
This unit operates on 110 240 V AC, 50/
60 Hz. Check that the units operating
voltage is identical with your local power
supply.
If anything falls into the cabinet, unplug
the unit and have it checked by qualified
personnel before operating it any further.
The unit is not disconnected from the
mains as long as it is connected to the
mains, even if the unit itself has been
turned off.
Unplug the unit from the mains if you do
not intend to use it for an extended period
of time. To disconnect the lead, pull it out
by the plug, never by the lead.
To prevent fire or shock hazard, do not
place objects filled with liquids, such as
vases, on the apparatus.
Installing
Allow adequate air circulation to prevent
internal heat buildup.
Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials (curtains,
draperies) that may block the ventilation
slots.
Do not install the unit near heat sources
such as radiators or air ducts, or in a place
subject to direct sunlight, excessive dust,
mechanical vibration or shock.
Do not install the unit in an inclined
position. It is designed to be operated in a
horizontal position only.
Keep the unit and cassettes away from
equipment with strong magnets, such as
microwave ovens or large loudspeakers.
Do not place heavy objects on the unit.
If the unit is brought directly from a cold
to a warm location, moisture may
condense inside the VCR and cause
damage to the video head and tape. When
you first install the unit, or when you
move it from a cold to a warm location,
wait for about four hours before operating
the unit.
Caution
Television programmes, films, video tapes
and other materials may be copyrighted.
Unauthorized recording of such material
may be contrary to the provisions of the
copyright laws. Also, use of this recorder
with cable television transmission may
require authorization from the cable
television transmitter and/or programme
owner.
Compatible colour/TV systems
This VCR is designed to record and play
back using the PAL (B/G, D/K and I),
MESECAM (B/G and D/K) and NTSC
(M*) colour systems. Recording of video
sources based on other colour systems
cannot be guaranteed.
* SLV-ED929MI only
For SLV-ED925PS, ED828ME/SG,
ED825PS, ED323ME/SG and ED225PS
NTSC colour signals can only be recorded
through the line input.
G-CODE is a registered trade mark of
Gemstar Development Corporation. The
G-CODE system is manufactured under
license from Gemstar Development
Corporation.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony SLV-ED323SG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony SLV-ED323SG in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info