136760
109
Zoom out
Zoom in
Previous page
1/120
Next page
109
Troubleshooting
Additional Information
Timer recording
The timer does not operate. Check that the clock is set.
Make sure a tape has been inserted.
Check that the safety tab has not been removed.
Make sure the tape is not at its end.
Make sure a programme has been set for timer recording.
Make sure your timer settings are past the current time.
Check that the decoder is turned on.
Check that the satellite tuner is turned on.
The clock stops if the DVD-VCR is disconnected from
the mains for more than one minute. Reset the clock and
timer.
Turn the power off and unplug the mains lead.
The VPS/PDC function does not
operate properly.
Check that the clock and the date are set correctly.
Check that the VPS/PDC time you set is the correct one
(there might be a mistake in the TV programme guide). If
the broadcast you wanted to record did not send the good
VPS/PDC information, the VCR will not start recording.
If the reception is poor, the VPS/PDC signal might be
altered and the VCR might not start recording.
PAY-TV/Canal Plus
You cannot watch PAY-TV/Canal
Plus programmes when the VCR is
in standby mode.
Check that “DEC” is set to “ON” for this channel in the
“TV STATION TABLE” menu.
Make sure the PAY-TV/Canal Plus Scart cable is plugged
securely.
A PAY-TV/Canal Plus programme is
always recorded scrambled.
Make sure the PAY-TV/Canal Plus Scart cable is plugged
securely.
Check that “DEC” is set to “ON” for this channel in the
“TV STATION TABLE” menu.
Others
A tape cannot be inserted. Check that a tape is not already in the tape compartment.
The selected input line connector
number does not appear in the
display window.
Press INPUT SELECT to display the connected line.
The VCR mechanism needs to be
cleaned.
Clean the cabinet, panel and controls with a dry, soft
cloth, or a soft cloth slightly moistened with a mild
detergent solution. Do not use any type of solvent, such
as alcohol or benzine.
Symptom Remedy
Symptoms caused by contaminated video heads
Normal picture Unclear picture Rough picture
initial
contamination
terminal
No picture (or
black & white
screen appears)
109


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony slv d910 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony slv d910 in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info