47863
18
Zoom out
Zoom in
Previous page
1/104
Next page
18
Trouble symptoms and remedies
If a problem is caused by the connected computer or other equipment, please refer to the connected equipment’s instruction manual.
Use the self-diagnosis function (page 20) if the following recommendations do not resolve the problem.
Symptom Check these items
No picture
If the 1 (power) indicator is not lit,
or if the 1 (power) indicator will not
light up when the 1 (power) switch
is pressed
Check that the power cord is properly connected.
Check that the 1 (power) switch is in the “on” position.
If the 1 (power) indicator is green
or flashing orange
Use the self-diagnostics function (page 20).
If CABLE DISCONNECTED
appears on the screen
Check that the video signal cable is properly connected and all plugs are firmly seated in
their sockets (page 7).
Check that the video input connector’s pins are not bent or pushed in.
A non-supplied video signal cable is connected. If you connect a non-supplied video
signal cable, CABLE DISCONNECTED may appear on the screen before entering the
power saving mode. This is not a malfunction.
If NO INPUT SIGNAL appears on
the screen, or the 1 (power)
indicator is either orange or
alternating between green and
orange
Check that the video signal cable is properly connected and all plugs are firmly seated in
their sockets (page 7).
Check that the video input connector’s pins are not bent or pushed in.
xProblems caused by the connected computer or other equipment
The computer is in the power saving mode. Try pressing any key on the keyboard or
moving the mouse.
Check that your graphic board is attached to the computer properly.
Check that the computers power is “on.
If OUT OF SCAN RANGE appears
on the screen
xProblems caused by the connected computer or other equipment
Check that the video frequency range is within that specified for the monitor. If you
replaced an old monitor with this monitor, reconnect the old monitor and adjust the
frequency range to the following:
Horizontal: 28 – 61 kHz (SDM-S51R), 28 – 80 kHz (SDM-S71R/S81R)
Vertical: 48 – 75 Hz
If using Windows If you replaced an old monitor with this monitor, reconnect the old monitor and do the
following. Select “SONY” from the “Manufactures” list and select “SDM-S51R” or
“SDM-S71R”or “SDM-S81R” from the “Models” list in the Windows device selection
screen. If “SDM-S51R” or “SDM-S71R”or “SDM-S81R” does not appear in the
“Models” list, try “Plug & Play”.
If using a Macintosh system If you use the Macintosh adapter (not supplied), check that the Macintosh adapter and the
video signal cable are properly connected (page 7).
Picture flickers, bounces,
oscillates, or is scrambled
Adjust the pitch and phase (page 12).
Try plugging the monitor into a different AC outlet, preferably on a different circuit.
Change the orientation of the display.
xProblems caused by the connected computer or other equipment
Check your graphics board manual for the proper monitor setting.
Confirm that the graphics mode (VESA, Macintosh 19" Color, etc.) and the frequency of
the input signal are supported by this monitor. Even if the frequency is within the proper
range, some graphic boards may have a sync pulse that is too narrow for the monitor to
sync correctly.
Adjust the computer’s refresh rate (vertical frequency) to obtain the best possible picture.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony SDM-S71R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony SDM-S71R in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info