47851
46
Zoom out
Zoom in
Previous page
1/403
Next page
21
GB
Picture is fuzzy Adjust the brightness and contrast (page 15).
Adjust the pitch and phase (analog RGB signal only) (page 16).
x Problems caused by a computer or other equipment connected, and not
caused by the display
Set the resolution to 1600 × 1200 on your computer.
Picture is ghosting Eliminate the use of video cable extensions and/or video switch boxes.
Check that all plugs are firmly seated in their sockets.
Picture is not centered or sized
properly (analog RGB signal only)
Adjust the pitch and phase (page 16).
Adjust the picture position (page 16). Note that some video modes do not fill the screen to
the edges.
Picture is too small x Problems caused by a computer or other equipment connected, and not
caused by the display
Set the resolution to 1600 × 1200 on your computer.
Picture is dark Adjust the backlight (page 15).
Adjust the brightness (page 15).
Adjust the gamma using GAMMA menu (page 15).
It takes a few minutes for the display to become bright after turning on the display.
The screen might turn darker, depends on ECO mode you selected.
Wavy or elliptical pattern (moire)
is visible
Adjust the pitch and phase (analog RGB signal only) (page 16).
Color is not uniform Adjust the pitch and phase (analog RGB signal only) (page 16).
White does not look white Adjust the color temperature (page 15).
Display buttons do not operate
( appears on the screen)
If MENU LOCK is set to ON, set it to OFF (page 17).
The device connecting through
the USB cable fails to operate
Check the USB cable (supplied) is connected properly (page 8).
Press the MAIN POWER switch and the 1 (power) indicator to turn on the display.
x Problems caused by your computer or other connected device
Check if your device has been turned on.
Reinstall the updated USB driver. For more information, contact the manufacture of your
product.
If you fail to operate your computer with the keyboard or mouse attached to the display,
connect the keyboard or mouse to your computer directly. After restarting your computer,
reset the USB connection. After having completed this process, connect the keyboard or
mouse back to the display. When the display is connected to a computer, keyboard, or
mouse via the USB port, you might not be able to operate your computer with them as you
restart the computer.
The display turns off after a while xProblems caused by the connected computer or other equipment
Set the computer’s power saving setting to off.
Resolution displayed on the menu
screen is incorrect
Depending on the graphics board setting, the resolution displayed on the menu screen may
not coincide with the one set on the computer.
After turning off the main power,
the 1 (power) indicator stays
bright for a while
When the main power is on but the 1 (power) switch is not pressed, or when the display is
in the power saving mode, if you turn the MAIN POWER switch off, the 1 (power)
indicator may not turn off right away. This is not a malfunction.
Symptom Check these items
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony SDM-S205F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony SDM-S205F in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 8,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info