Manual Sony SDM-M61 (page 21 of 104) (English, German, French, Italian, Spanish)

47839

Zoom out

Zoom in

1/104

G:\_Upload\4084256121\4084256121SDMM61AEP\02GB-SDMM61AEP\01GB02BAS-UC.fm

masterpage:Right

SDM-M61

4-084-256-12(1)

Self-diagnosis function

This monitor is equipped with a self-diagnosis function. If there is

a problem with your monitor or computer(s), the screen will go

blank and the 1 (power) indicator will either light up green or

flash orange. If the 1 (power) indicator is lit in orange, the

computer is in power saving mode. Try pressing any key on the

keyboard or moving the mouse.

If the 1 (power) indicator is green

Turn off the 1 (POWER) switch and disconnect the

video signal cables from the monitor.

Turn the monitor on by pressing the 1 (POWER)

switch.

If all four color bars appear (white, red, green, blue), the monitor

is working properly. Reconnect the video input cables and check

the condition of your computer(s).

If the color bars do not appear, there is a potential monitor failure.

Inform your authorized Sony dealer of the monitor’s condition.

If the 1 (power) indicator is flashing orange

Press the 1 (power) switch twice to turn the monitor off

and then on.

If the 1 (power) indicator lights up green, the monitor is working

properly.

If the 1 (power) indicator is still flashing, there is a potential

monitor failure. Count the number of seconds between orange

flashes of the 1 (power) indicator and inform your authorized

Sony dealer of the monitor’s condition. Be sure to note the model

name and serial number of your monitor. Also note the make and

model of your computer and graphics board.

Specifications

LCD panel Panel type: a-Si TFT Active Matrix

Picture size: 16.0 inch

Input signal format RGB operating frequency*

Horizontal: 28 – 92 kHz

Vertical: 48 – 85 Hz

Resolution Horizontal: Max.1280 dots

Vertical: Max.1024 lines

Video input connector Analog RGB: HD15

Digital/analog RGB: DVI-I 29 pins

Input signal levels Analog RGB video signal:

0.7 Vp-p, 75 Ω, positive

SYNC signal:

TTL level, 2.2 kΩ,

positive or negative

(Separate horizontal and vertical,

or composite sync)

0.3 Vp-p, 75 Ω, negative

(Sync on green)

Digital RGB (DVI) video signal:

TMDS (Single link)

Audio output 1 W × 2

Headphones jack Stereo minijack

Accepts impedance of 16 – 48 Ω

AUDIO IN jack Stereo minijack × 2

Accepts impedance of 47 kΩ

Accepts level 0.5 Vrms

Power requirements 100 – 240 V, 50 – 60 Hz,

0.7 – 0.35 A

Power consumption Max. 35 W

Operating temperature 5 – 35

°C

Dimensions (w/h/d) Display (upright):

Approx. 400 × 357 × 180 mm

(15

× 14

× 7

/8 inches)

(with stand)

Approx. 400 × 318 × 57 mm

(15

× 12

× 2

/4 inches)

(without stand)

Mass Approx. 5.4 kg (11 lb 14 oz) (with

stand)

Plug & Play DDC2B

Accessories See page 7.

* Recommended horizontal and vertical timing condition

• Horizontal sync width duty should be more than 4.8% of total

horizontal time or 0.8 µs, whichever is larger.

• Horizontal blanking width should be more than 2.5 µsec.

• Vertical blanking width should be more than 450 µsec.

Design and specifications are subject to change without notice.

1 (power)

indicator

01GB02BAS-UC.book Page 21 Monday, July 2, 2001 2:26 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sony SDM-M61 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 3,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sony SDM-M61 Manual

Product: