159713
7
Zoom out
Zoom in
Previous page
1/92
Next page
Getting Started
7
EN
PRESET +/–
7 Repeat Steps 2 through 6 to store other stations.
When you tune in AM stations
Adjust the direction of the AM loop aerial for optimum
reception.
If the STEREO indicator remains off
Press ST/MONO when an FM stereo broadcast is
received.
If an FM stereo programme is distorted
The STEREO indicator flashes. Press ST/MONO to
change to monaural (MONO). You will not have the
stereo effect but the distortion will be reduced. To return
to stereo mode, press this button again.
If you cannot tune in the station you want (Manual
Tuning)
With Manual Tuning, you can search through all stations
broadcasting on each band, and tune in stations with
extremely weak signals that you might not be able to
receive with Automatic Tuning.
1 Press TUNER FM/AM repeatedly to choose FM or
AM.
2 Press PRESET +/– repeatedly until you tune in the
desired station.
Press PRESET + for a higher frequency; press
PRESET – for a lower frequency.
If “PRESET” appears in the display
Press TUNE MODE repeatedly until “PRESET”
disappears from the display, then do the above
procedure.
RDS (Radio Data System) Station names are stored
automatically
When you preset an RDS station broadcasting station
name information, the station name is automatically
stored at the station preset.
If you want to label the stations
Follow the procedure described in “Naming the Preset
Stations” on page 13.
Note
If the mains lead is disconnected for about a month, the preset
stations will be cleared from the CD Receiver’s memory, and
you will have to preset the stations again.
Presetting Radio Stations
This section shows you how to store up to 30 of your
favourite FM or AM stations manually onto preset
codes made up of characters (A, B or C) and numbers
(1–0), such as A7. You can store up to 10 stations on
each of the 3 different letters. You can use these letters
to classify stations according to music category or
station band.
1 Press POWER to turn on the CD Receiver.
2 Press TUNER FM/AM repeatedly to choose either
FM or AM.
3 Press and hold PRESET +/– and release it when
the frequency numbers start changing.
Press PRESET + for a higher frequency; press
PRESET – for a lower frequency.
When this unit locates a station, “TUNED”
appears in the display and scanning stops
automatically (Automatic Tuning).
If “PRESET” appears in the display
Press TUNE MODE repeatedly until “PRESET”
disappears from the display, then do the above
procedure.
4 Press MEMORY.
The lowest available preset code number flashes to
indicate that this unit is ready to store the station.
5 Press PRESET +/– repeatedly until the preset code
you want appears in the display.
Each time you press the button, the preset code
changes as follows:
A1 “” ... “” A0 “” B1 “” ...
C0 “” ... “” C1 “” B0
If you store a station at a preset code where you
have already stored another station, the previous
station is erased.
6 Press ENTER.
This unit stores the station at the preset code you
specified.
TUNER FM/AM
MEMORY TUNE MODEENTER
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony rxd 700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony rxd 700 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony rxd 700

Sony rxd 700 User Manual - German, Dutch, Italian, Swedish - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info