159713
4
Zoom out
Zoom in
Previous page
1/92
Next page
Getting Started
4
EN
Unpacking
Check that you received the following items:
Remote commander (remote) (1)
R6 (size AA) batteries (2)
AM loop aerial (1)
Inserting batteries into the remote
You can control the CD Receiver using the supplied
remote.
Insert two R6 (size AA) batteries by matching the +
and – on the batteries. When using the remote, point it
at the remote sensor g on the CD Receiver.
Hooking Up the System
Overview
This section describes how to connect your speakers,
tape deck, FM aerial and the supplied AM loop aerial
to the CD Receiver. Be sure to turn off the power of
each component before making the connections.
When to replace batteries
With normal use, the batteries should last for about six
months. When the remote no longer operates the CD
Receiver, replace both batteries with new ones.
Notes
Do not leave the remote near an extremely hot or humid
place.
Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
If you do not use the remote for an extended period of time,
remove the batteries to avoid possible damage from battery
leakage and corrosion.
To mains
TAPE
FM ANTENNA
SPEAKERS A
SPEAKERS B
Speaker system hookups
You can connect two pairs of speakers, A and B.
What cords will I need?
Speaker cord (not supplied) (1 for each speaker)
Twist the stripped ends of the cord about 15 mm (about 2/3
inch). Be sure to match the speaker cord to the appropriate
terminal on the components: + to + and – to –. If the cords
are reversed, the sound will be distorted and will lack bass.
Connecting to bi-wire system speakers
Since the two pairs of speaker terminals on your CD
Receiver, SPEAKERS A and B, can provide
simultaneous speaker output, you can use them to
connect a bi-wire speaker system.
To select speaker system A or B
Press SPEAKER A or B. To drive both speaker systems
simultaneously, press both SPEAKER A and B.
Note
Use speakers with a nominal impedance of 4 to 16 ohms.
When outputting at the same time to two speaker systems,
use speakers with a nominal impedance of 8 to 16 ohms.
Getting Started
AM ANTENNA
+–
+–
+–
+–
(+)
(–)
(+)
(–)
]
}
]
}
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony rxd 700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony rxd 700 in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony rxd 700

Sony rxd 700 User Manual - German, Dutch, Italian, Swedish - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info