67640

Sony RMVL1400T.CE7 Manual

32
Zoom out
Zoom in
Previous page
1/96
Next page
32
GB
Problem
You cannot operate a component
even after you programmed the
remote control signals with the
“learning” function.
“NG” appears in the third line on
the screen and a beep sounds five
times while setting the preset
code.
“NG” appears in the third line on
the screen and a beep sounds five
times while learning.
“FULL” appears in the third line
on the screen and a beep sounds
five times while learning.
“NG” appears in the third line on
the screen and a beep sounds five
times when trying to copy settings
of a component label to another
component label.
A beep sounds twice while setting
the preset code.
A beep sounds twice while
learning.
A beep sounds twice while
programming a Component
Macro.
“NG” appears in the third line on
the screen and a beep sounds
twice while programming the
power-on function.
Solution
Make sure that the Remote Commander has learned the
correct signals. If not, see “Notes” on page 13 or “For
accurate learning” (page 14), and try the learning
procedure again (page 12).
Preset code setting has not succeeded. Set the preset code
again, referring to the supplied “Preset Code List”.
• Learning has not succeeded. Try the learning procedure
again (page 12), referring to “For accurate learning”
(page 14).
• While learning, you pressed the button other than the one
on which you want to programme the signal. Programme
the signal on the correct button again (page 12).
Learned signal memory is full. Clear learned signals that
are not frequently used (page 14), then programme the
desired remote signal.
• Setting cannot be copied on COMPONENT select
buttons or Label select buttons in the following
situations:
– A learned signal or Component Macro is programmed.
– The button’s component label has been changed.
– The button’s function label has been changed.
In this case, reset those settings (page 28) before copying.
• You are copying the settings of A/V components other
than a TV or amplifier on the Label select button
assigned with a TV or amplifier. The TV button is
assigned with only TV and the Label select button to
which an amplifier is preset is assigned with only
amplifier or DVD player home theatre system.
• The Remote Commander fails to copy the settings if the
programmed signal data of the button is too large. In this
case, clear programmed signals that are not frequently
used (page 14), then copy the settings again.
The preset code cannot be set on the COMPONENT select
button or Label select button in the following situations:
– A learned signal or Component Macro is programmed.
– The button’s component label has been changed.
– The button’s function label has been changed.
In this case, reset those settings (page 28) before setting.
• See “For accurate learning” (page 14).
• Other remote signal has been programmed on the desired
button. Clear the learned signal (page 14) or programme
the remote signal on another button (page 12).
• Learning standby time (10 seconds) has been exceeded.
Start over from the beginning.
• You are assigning a Component Macro on the
COMPONENT select button or Label select button on
which another Component Macro has been assigned.
Clear the Component Macro assigned to the button (page
20), then assign the desired Component Macro.
• The programmed steps exceed 32 after adding delay
while checking the Component Macro. A maximum of 32
steps (including delay) can be programmed.
Reprogramme the Component Macro.
You are programming the power-on function (page 21) on
the COMPONENT select button or Label select button
assigned with a preset code other than Sony’s. The power-
on function can be programmed only on the button
assigned with Sony’s preset code.
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony RMVL1400T.CE7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony RMVL1400T.CE7 in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony RMVL1400T.CE7

Sony RMVL1400T.CE7 User Manual - German, Dutch, French, Italian - 180 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info