21319
79
Zoom out
Zoom in
Previous page
1/108
Next page
79
Settings and Adjustments
Some broadcast systems ensure a Teletext
service* in which the complete programmes and
their data (title, date, channel, recording start time,
etc.) are stored day by day. A TV guide page
corresponds to each day of the week. When
recording a programme, the recorder
automatically takes the programme name from the
Teletext pages and stores it as the title name. The
TV guide page numbers depend entirely on the
broadcast itself and may be subject to change. If
so, you may have to set those TV guide page
numbers manually in the TV Guide Page menu.
* Not available in some areas.
1 Select “TV Guide Page” in “Settings,” and
press , or ENTER.
The TV Guide Page menu appears.
2 Select the programme position for which you
want to set or change the TV guide page by
pressing PROG +/–.
The TV guide page numbers (Example:
P301) appear automatically when the
recorder detects them.
If no page numbers are detected (P000), you
have to set the appropriate TV guide page
number manually.
3 Select the TV guide page number you want to
modify, and press ENTER.
4 Press the number buttons or </M/m/, to
enter the TV guide page number, and press
ENTER to confirm the setting.
If you make a mistake, press CLEAR to re-
enter the correct number.
To set or change another TV guide page
number, repeat steps 3 and 4 above.
z Hint
To view Teletext information on your TV screen during
a broadcast, switch to your TV’s tuner by pressing
t TV/VIDEO.
b Notes
In step 4 above, enter “000” if you do not want to use
the TV guide page number for automatic labelling. The
recorder will instead store a default title name
(programme position, start time - stop time).
Refer to the Teletext information on your TV screen to
obtain the TV guide page number with programme
titles and their start times.
If the Teletext TV guide has a page which always
shows the programmes for the current day, this page
should be input for all days.
If you start recording more than three minutes before
the programme is scheduled to start, the correct label
information may not be transferred.
Note that this function may not work correctly with
programmes broadcast from some stations.
If the broadcast system updates the Teletext
information at the moment recording starts, the title
label may not correspond to the recorded programme.
In this case, you may have to manually enter the correct
title (page 36).
Auto Adjust
Turns on the Auto Clock Set function when a channel
in your local area broadcasts a time signal.
1 Select “Clock” in “Settings,” and press
ENTER.
2 Select “Auto Adjust,” and press ENTER.
3 Select “On,” and press ,.
TV Guide Page
Settings - TV Guide Page
4
Sun P 301
P 302
P 303
P 304
P 305
P 306
P 307
Prog.
Sat
Fri
Thu
Wed
Tu e
Mon
Settings - TV Guide Page
4
P 000
P 000
P 000
P 000
P 000
P 000
P 000
Prog.
Sun
Sat
Fri
Thu
Wed
Tu e
Mon
Settings - TV Guide Page
4
P 000
P 000
P 000
P 000
P 000
P 000
P 000
Prog.
Sun
Sat
Fri
Thu
Wed
Tu e
Mon
0 0 0
P
Clock
Settings - Clock
Auto Adjust :
Present Time : 1. 1. 2004. 21:39Thu
Off 1
,continued
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony RDRHX510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony RDRHX510 in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony RDRHX510

Sony RDRHX510 User Manual - Dutch - 124 pages

Sony RDRHX510 User Manual - Portuguese - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info