116
COMPONENT VIDEO OUT (Y, PB/CB, PR/
C
R)
Phono jack
Y: 1.0 Vp-p, PB/CB, PR/CR: 0.7 Vp-p, 75
ohms
S VIDEO OUT
4-pin, mini-DIN jack
Y: 1.0 Vp-p, unbalanced, sync negative
C: 0.286 Vp-p, load impedance 75 ohms
General
Power requirements
220-240 V AC, 50 Hz
Power consumption
40 W
Power back-up
Back-up duration: 0 min
Operating temperature
5°C to 35°C
Storage temperature
–20°C to 60°C
Operating humidity
25% to 80%
Dimensions including projecting parts
and controls (w/h/d)
Approx. 430 × 85 × 334 mm
Mass
Approx. 4.9 kg
Supplied accessories
Remote commander (remote) (1)
R6 (size AA) batteries (2)
Aerial cable (1)
Audio/video cord (1)
Design and specifications are subject to change
without notice.
Compatible colour systems
[DVD recorder section]
This recorder is designed to record using the PAL
colour system and play back using the PAL or
NTSC colour systems.
The signals of the SECAM colour system can be
received or recorded but played back in the PAL
colour system only.
[VCR section]
This recorder is designed to record and play back
using the PAL colour system.
Recording of video sources based on other colour
systems cannot be guaranteed.