625890
13
Zoom out
Zoom in
Previous page
1/124
Next page
13
Hookups and Settings
Step 1: Connecting the Aerial Cable and Set Top Box
Controller
Select one of the following aerial hookups. Do NOT set “Line3 Input” of the “Scart Setting” to
“Decoder” in the “Video” setup (page 99) when making connection A or B.
If the set top box receiver can output RGB signals
This recorder accepts RGB signals. If the set top box receiver can output RGB signals, connect
the TV SCART connector on the set top box receiver to the LINE 3/DECODER jack, and set
“Line3 Input” of “Scart Setting” to “Video/RGB” in the “Video” setup (page 98). RGB signal
images can be displayed on the TV screen, but cannot be recorded. Note that this connection
and setup disable the SMARTLINK function. If you want to use the SMARTLINK function
with a compatible set top box receiver, see the instructions supplied with the set top box
receiver.
If you want to use the Synchro Rec function
A SCART connection between the set top box receiver and the recorder is necessary to use the
Synchro-Recording function. See “Recording from connected equipment with a timer (Synchro
Rec)” on page 61.
Set “Line3 Input” of “Scart Setting” in the “Video” setup (page 98) according to the
specifications of your set top box receiver. See your set top box receiver’s instructions for more
information.
If you are using a B Sky B tuner, be sure to connect the tuner’s VCR SCART jack to the LINE
3/DECODER jack. Then set “Line3 Input” of “Scart Setting” according to the specifications of
the VCR SCART jack on your set top box receiver.
The set top box receiver control function can be used with hookup A or B. It allows the recorder
to control a set top box receiver via the supplied set top box controller. The recorder controls
programme positions on the set top box receiver for timer recording. You can also use the
recorder’s remote control to change programme positions on the set top box receiver whenever
the set top box receiver and recorder are turned on.
To use the set top box receiver control function, you need to connect the set top box controller
(page 24). After setting up the set top box receiver control, check that the recorder can correctly
control the set top box receiver (page 25).
b Notes
If your aerial is a flat cable (300-ohm twin lead cable), use an external aerial connector (not supplied) to
connect the aerial to the recorder.
If you have separate cables for AERIAL antennas, use an AERIAL UHF/VHF band mixer (not supplied)
to connect the aerial to the recorder.
Synchro-Recording does not work with some tuners. For details, see the tuner’s operating instructions.
If you disconnect the recorder’s mains lead, you will not be able to view the signals from the connected
set top box receiver.
If you have Hookup
Set top box receiver with an aerial output (or aerial and SCART
output)
A (page 14)
Set top box receiver with a SCART output only B (page 15)
No set top box receiver C (page 16)
Using the set top box receiver control function
,continued
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony RDR-HX525 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony RDR-HX525 in the language / languages: English as an attachment in your email.

The manual is 7,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info