60287
50
Zoom out
Zoom in
Previous page
1/112
Next page
50
2 Select the desired audio signal when
recording a bilingual programme.
Set “External Audio” to “Bilingual” and
“Bilingual Recording” to “A/L” or “B/R”
in the “Audio In” setup (page 81).
For details about the bilingual recording,
see page 42.
3 Set the timer on the connected
equipment to the time of the
programme you want to record, and
turn it off.
4 Press down x REC STOP on the
recorder for more than 3 seconds.
The SYNCHRO REC indicator lights up
in the front panel display and the recorder
turns off. The recorder is ready to start
Synchro-Recording.
You can also set the recorder to stand by
for Synchro-Recording by setting
“Synchro Rec.” of “Timer Recording” to
“Yes” from the System Menu.
To cancel Synchro Rec before recording
starts
Press [/1.
The SYNCHRO REC indicator in the front
panel display turns off.
To cancel Synchro Rec during recording
Press down z REC for more than 3 seconds.
The Synchro Rec is cancelled, and the
recording continues.
To stop recording
Press x REC STOP. Then select “Yes” in the
confirmation display, and press ENTER.
b Notes
The recorder starts recording only after detecting
a video signal from the connected equipment. The
beginning of the programme may not be recorded
regardless of whether or not the recorder’s power
is on or off.
The Synchro Rec function does not work when
“LINE 1 In” is set to “Decoder” in the “Video In/
Out” setup (page 80).
The Synchro Rec function does not work with
some tuners. For details, see the tuner’s operating
instructions.
The Synchro Rec function does not work when
the timer is set for the programme from the LINE
1/DECODER jack and the VPS/PDC function is
on.
While the recorder is standing by for Synchro-
Recording, the Auto Clock Set function (page 75)
does not work.
To use the Synchro Rec function, you must first
set the recorder’s clock correctly.
For a bilingual programme, only the audio signal
selected in step 2 can be played back.
If the timer settings of a Synchro-
Recording and another timer recording
overlap
Timer recordings always have priority. The
Synchro-Recording starts only after the timer
recording has finished.
Synchro-
Recording
will be cut off
Timer
recording
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony RDR-GX350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony RDR-GX350 in the language / languages: English as an attachment in your email.

The manual is 7,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony RDR-GX350

Sony RDR-GX350 User Manual - German - 128 pages

Sony RDR-GX350 User Manual - Dutch - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info