60287
44
Zoom out
Zoom in
Previous page
1/112
Next page
44
“VPS/PDC”: Sets the VPS/PDC
function. See “About the VPS/PDC
function” below.
“Bilingual Recording”: Sets the sound
to be recorded (page 81).
To enter a title name, select “Set Title
Name” and press ENTER (page 34).
If you make a mistake, select the item
and change the setting.
4 Select “OK,” and press ENTER.
The “Timer List” display appears
(page 48).
The timer recording indicator lights up
on the front panel display and the
recorder is ready to start recording.
Unlike a VCR, there is no need to turn off
the recorder before the timer recording
starts.
To stop recording during timer recording
Press x REC STOP.
Note that it may take a few seconds for the
recorder to stop recording.
On-screen instructions may appear after
pressing x REC STOP. In this case, follow
the on-screen instructions.
About the VPS/PDC function
VPS/PDC signals are transmitted with TV
programmes in some broadcast systems.
These signals ensure that timer recordings are
made regardless of any broadcast delays,
early starts, or broadcast interruptions.
To use the VPS/PDC function
Set “VPS/PDC” to “On” in step 3 above.
When you turn on this function, the recorder
starts scanning the channels before the timer
recording starts.
Rec. Mode Adjust
If there is not enough available disc space for
the recording, the recorder automatically
adjusts the recording mode to enable the
entire programme to be recorded. Set “Rec.
Mode Adjust” to “On” in the “Recording”
setup (page 86).
If the timer settings overlap
The confirmation screen appears.
To store the setting, select “Yes.”
To cancel the overlapped setting, select “No.
To confirm, change, or cancel a timer
recording
See “Checking/Changing/Cancelling Timer
Settings (Timer List)” on page 48.
z Hint
You can also display the Timer display by selecting
“Timer Recording” from the System Menu.
b Notes
Check that the clock is correctly set before setting
the timer recording. If not, the timer recording
cannot be made.
To record a satellite programme, turn on the
satellite tuner and select the satellite programme
you want to record. Leave the satellite tuner
turned on until the recorder finishes recording. If
you connect equipment with a timer function, you
can use the Synchro Rec function (page 49).
Even if the timer is set for the same daily or
weekly programme, the timer recording cannot be
made if it overlaps with a programme that has
priority. “Overlap” will appear next to the
overlapped setting in the Timer List. Check the
priority order of the settings (page 48).
Even if the timer is set, timer recordings cannot be
made while recording a programme that has
priority.
The “Rec. Mode Adjust” function only works
with a timer recording and the VPS/PDC function
set to off. It does not function with Quick Timer
or Synchro Rec.
The beginning of some recordings may not be
made when using the VPS/PDC function.
You cannot extend the recording duration time
when “VPS/PDC” is set to “On.”
The recording mode cannot be set to “AUTO”
when “VPS/PDC” is set to “On.”
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sony RDR-GX350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sony RDR-GX350 in the language / languages: English as an attachment in your email.

The manual is 7,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sony RDR-GX350

Sony RDR-GX350 User Manual - German - 128 pages

Sony RDR-GX350 User Manual - Dutch - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info